What You Get with the Custom Nameplate
The laser-engraved Club Car Precedent custom name plate is a 15.75" x 2" x 1/16" acrylic plaque designed for exterior use. It includes strong outdoor tape for mounting and a UV-stable finish to resist sun damage. You choose a background color (Brushed Gold, Brushed Gold with Border, Brushed Aluminum, or Brushed Aluminum with Border) and enter your own text to preview before ordering. Lead time is 1-3 days, and all sales are final unless an exception is made.
Nameplate Specifications at a Glance
-
Custom Laser Engraved Club Car Precedent Nameplate: Size: 15.75" x 2" x 1/16" This size fits the standard emblem recess on a Club Car Precedent. Measure your cart's emblem area to confirm compatibility before ordering.
Custom Laser Engraved Club Car Precedent Nameplate
-
Custom Laser Engraved Club Car Precedent Nameplate: UV Stable Acrylic designed for exterior exposure The acrylic resists fading and yellowing from sunlight, keeping your custom text readable for years outdoors.
-
Custom Laser Engraved Club Car Precedent Nameplate: Strong Outdoor Tape included No additional adhesive is needed. The included tape is engineered for exterior use, but surface prep is still critical for a lasting bond.
How to Install the Nameplate
Installation is straightforward because the tape is pre-applied. Follow these steps for a secure, long-lasting mount.
- 1. Clean the mounting surface: Wash the area on your Club Car Precedent where the nameplate will go. Remove all dirt, wax, and grease. Use isopropyl alcohol for a final wipe and let it dry completely.
- 2. Position the nameplate without removing the backing: Hold the nameplate in place to check alignment. Mark the corners lightly with removable tape or a pencil if needed. Make sure it sits flat against the cart body.
- 3. Peel and press: Remove the backing from the outdoor tape. Press the nameplate firmly onto the cleaned surface, starting from the center and working outward to push out air bubbles.
- 4. Apply pressure: Press along the entire nameplate with your hand or a soft cloth. For best adhesion, avoid washing or driving in rain for a period after install.
Caring for Your Custom Nameplate
The UV-stable acrylic is designed to withstand outdoor exposure, but a little care extends its life. Wash the nameplate with mild soap and water using a soft sponge. Avoid abrasive cleaners or scrub pads that could scratch the engraved surface. Do not use high-pressure washers directly on the nameplate, as the water force could loosen the tape over time.
If the nameplate becomes dirty after a ride, a quick wipe with a damp microfiber cloth is enough. Check the edges periodically for lifting; if you notice any, press them back down. The tape is strong, but extreme heat or repeated pressure washing can weaken the bond.
What the Supplied Information Does Not Cover
The product record does not specify a recommended cure time for the tape or a maximum operating temperature. It also does not include instructions for removing an old nameplate or for mounting on non-flat surfaces. If your Club Car Precedent has a textured or curved emblem area, test fit the nameplate before removing the backing to ensure it sits flush.
