Start with the seat's smallest setting

The Cybex Cloud G3 PLUS is designed to hold babies from 40 cm in height up to 87 cm and a maximum weight of 13 kg, which covers birth to roughly 24 months. For a newborn, the key is to begin with the seat configured for the smallest occupant and adjust as your baby grows.

The seat includes a removable newborn inlay that creates a snug, secure fit for the smallest babies. Use it from day one, and remove it only when your baby needs more room. The 14-position adjustable headrest should sit so the harness straps come over your baby's shoulders at or just below shoulder level, not behind the back.

A simple newborn fit check

These checkpoints help you confirm a secure fit before every journey. They are based on the seat's supplied features and general harness-fit principles; always follow the printed manual for your specific seat.

  1. 1. Confirm the inlay is in place: The removable newborn inlay is designed for the smallest babies. With it fitted, your baby should sit snugly without the head or body slumping to one side.
  2. 2. Adjust the headrest to shoulder height: The 14-position headrest moves the harness with it. Set it so the shoulder straps emerge at or just below your baby's shoulders.
  3. 3. Buckle and tighten the harness: Fasten the buckle and pull the harness adjuster until the straps lie flat against the body. You should not be able to pinch a horizontal fold in the strap at the collarbone.
  4. 4. Check the chest clip position: If your seat has a chest clip, it should sit at armpit level. The Cloud G3 PLUS supplied information does not detail a chest clip, so check your manual for this step.
  5. 5. Remove bulky clothing: Thick coats or snowsuits can create slack under the harness. Dress your baby in normal layers and use a blanket over the buckled harness for warmth.

Why the inlay and headrest matter for newborns

  • Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige: Removable newborn inlay for a snug, secure fit from as small as 40 cm. The inlay is what makes the seat usable from birth; without it, a small baby may not be held securely.

    Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige

    Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige

  • Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige: 14-position adjustable headrest grows with your child up to approximately 24 months. You will adjust the headrest frequently in the first year; knowing it has 14 positions helps you fine-tune the harness height as your baby grows.

Getting your baby in and out without waking them

The Cloud G3 PLUS rotates a full 180 degrees and has a one-click release, which brings the seat closer to you and reduces awkward reaching across the car. This is especially useful when you are lifting a sleeping newborn in and out.

The seat can also be detached from its base and clicked onto compatible Cybex strollers with adapters, so you can transfer your baby from car to pushchair without disturbing them. The same Base G3 is compatible with the Sirona G3 toddler seat, so one base can serve from birth to around four years.

Seat features that support a secure newborn fit

  • Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige: Rear-facing infant car seat with an AGR-certified ergonomic lie-flat position that supports healthy posture, organ space and breathing from birth. The lie-flat position is designed for newborns, and the AGR certification indicates it has been assessed for back health.
  • Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige: Integrated Linear Side-impact Protection System (L.S.P.) delivers around 15% more side-impact protection compared to the same seat without the system, based on Cybex internal testing. Side-impact protection is a key safety consideration for any infant seat; this gives you a sense of the added protection.
  • Cybex Cloud G3 Infant Car Seat | PLUS - Almond Beige: XXL sun canopy with UPF50+ protection shields your baby from UV rays and wind. A newborn's skin is sensitive; the canopy helps protect them from direct sun during car journeys and walks.

What to check before your first drive

  • Installation: The supplied information does not include step-by-step installation instructions for the base or seat belt routing. Follow the printed manual and your vehicle handbook for correct installation.
  • Harness tightness: The pinch test is a useful guide, but always defer to the manual's instructions for your seat.
  • Inlay removal: Remove the newborn inlay when your baby needs more room, but check the manual for the exact criteria (often based on shoulder height or weight).
  • Headrest adjustment: Recheck the headrest height as your baby grows; the 14 positions allow fine adjustment.

A note on the Almond Beige finish

The Cybex Cloud G3 PLUS in Almond Beige is a light-coloured fabric that shows spills and marks more readily than darker options. The supplied information does not include specific cleaning instructions, so check the seat's care label before cleaning. The integrated premium mesh on Plus models is six times more breathable than comparable fabrics, which helps with airflow on warmer days.