Quick answer

To display a PG Gundam kit on a Snake Bone stand, attach the metal connector to the kit's waist or back, then adjust the articulated arm for balance and pose.

Why the Snake Bone stand works for PG kits

The Playman Studio Snake Bone Action Base Stand uses a flexible metal spine instead of fixed plastic arms, giving you precise control over the display angle. This is especially useful for heavy 1/60 Perfect Grade kits like the PG RX-78-2 Unleashed, where a standard action base may struggle to hold the weight over time.

The stand includes a metal connector that locks into the kit's structural points, reducing the risk of sagging. However, because the Snake Bone is fully articulated, it requires careful balancing to avoid tipping the entire assembly.

How to set up your PG Gundam on a Snake Bone stand

  1. Attach the connector to the kit: Locate the waist or back attachment point on your PG RX-78-2 Unleashed. Slide the metal connector into the slot until it clicks. Common mistake: forcing the connector into a non-matching slot can scratch the kit or damage the peg. Check the manual for the exact attachment point on your PG kit.
  2. Lock the Snake Bone arm onto the base: Insert the base end of the Snake Bone into the included stand plate. Tighten any locking screws if present. Common mistake: leaving the screws loose causes the arm to droop under the kit's weight. Finger-tighten screws, then give a quarter turn with a small screwdriver.
  3. Attach the kit to the Snake Bone arm: Align the connector on the kit with the clamp at the top of the Snake Bone. Press firmly until you hear a click. Common mistake: not fully engaging the clamp can let the kit fall during posing. Test the connection by gently lifting the kit before releasing your hands.
  4. Adjust the pose and balance: Bend the Snake Bone segments to your desired angle. Support the kit with one hand while adjusting. Common mistake: overextending the arm past its stable range causes the base to tip. Keep the center of gravity over the base plate for a stable display.

Product details

  • Playman Studio Snake Bone Action Base Stand Black for PG RX-78-2 Unleashed 1/60: Playman Studio Snake Bone Action Base Stand Black for PG RX-78-2 Unleashed 1/60 includes a connector and metal Snake Bone action base stand. The metal Snake Bone provides strong, adjustable support specifically designed for the weight and connection points of the PG RX-78-2 Unleashed.

    Playman Studio Snake Bone Action Base Stand Black for PG RX-78-2 Unleashed 1/60

    Playman Studio Snake Bone Action Base Stand Black for PG RX-78-2 Unleashed 1/60