Quick answer
If your Gozney Dome ignitor isn't sparking, first confirm the issue with the Gozney CX team. The Dome Ignitor Replacement Kit fixes the original Dome, but it does not fit the Dome Gen 2 Series.
Diagnose before you buy
A dead ignitor can be frustrating, but the right fix starts with a correct diagnosis. The Dome Ignitor Replacement Kit is designed specifically for the original Dome model. Before ordering, check your oven's generation — the kit is not compatible with Dome Gen 2. Gozney's CX team can help confirm the fault and recommend the correct part.
How to install the Dome Ignitor Replacement Kit
- Confirm the fault: Contact Gozney CX to diagnose the ignitor issue. Do not proceed with the replacement until they confirm the Dome Ignitor Replacement Kit is the correct fix. Skipping this step risks buying a kit that doesn't solve your specific problem.
- Gather tools and safety gear: You'll need a screwdriver set and gloves. Ensure the oven is completely cool and the gas supply is turned off before starting. Working on a hot or live oven can cause injury or damage.
- Remove the old ignitor: Locate the ignitor assembly inside the oven. Unscrew the mounting bracket and carefully disconnect the wire. Note the routing of the wire for reinstallation. Take a photo before removal to remember the wire path.
- Install the new ignitor: Connect the new ignitor wire to the same terminal, route it exactly as the original, and secure the bracket with screws. Double-check that the wire is not pinched or touching hot surfaces. A loose wire is the most common cause of a new ignitor not sparking.
- Test the spark: Reconnect the gas supply, turn the oven knob to the ignition setting, and press the ignitor button. You should see and hear a consistent spark. If not, re-check the wire connection and bracket alignment. No spark after rechecking? Contact Gozney CX — the kit may need replacement.
Product details
-
Dome Ignitor Replacement Kit: Kit to replace the ignitor in the Dome. Only purchase this if you have already had this fault diagnosed with the Gozney CX team and they have recommended this as a fix. Not suitable for use with the Dome Gen 2 Series. Saves you from buying the wrong part — always verify your oven model and get a professional diagnosis first.
Dome Ignitor Replacement Kit