Quick answer

Start with a full charge and water-based lube, then explore the 10 vibration modes on the external end before inserting either end. For couples, agree on who controls the modes and use the double-ended shape for shared penetration or external stimulation.

Why the double-ended shape changes your approach

Unlike a single-ended toy, this 7.5'' double ended vibrating rose dildo has two insertable ends, so you need to decide which end goes where before you start. That planning matters more than the number of vibration modes, because switching ends mid-session is awkward once lube is involved.

The rose design adds visual appeal but also means the textured petals can catch on bedding or clothing. Keep a towel nearby and check the surface before play so you are not distracted by cleanup.

Vibration modes: what to expect from 10 settings

Ten modes usually combine steady speeds with patterned pulses, but the exact sequence is not listed in the catalog. Treat the first few modes as lower intensity and later modes as stronger or more patterned, then adjust based on your own response rather than assuming a fixed order.

The motor is rated at ≤55dB, which is quiet enough for most homes but not silent. If discretion matters, run it under a blanket first to judge the sound in your space.

Position ideas for solo and couples play

For solo use, lying on your side with knees bent gives you easy reach to both ends and the controls. For couples, the most comfortable rose dildo positions are usually side-by-side or one partner lying back while the other guides the toy, because the double-ended shape needs both people to stay close.

Avoid positions that put weight on the toy or bend it sharply. The silicone-covered body is flexible enough for gentle curves, but forcing an angle can make insertion uncomfortable.

Step-by-step: using your double ended vibrating rose dildo

  1. Charge fully before first use: Plug in the Type-C cable and wait up to 2 hours for a full charge. A common mistake is assuming a partial charge is enough; the working time is about 1.5 hours, so start full to avoid a mid-session stop. Check the charging port is dry and free of lube before connecting.
  2. Apply water-based lube to both ends: Silicone toys pair best with water-based lube. Apply a generous amount to each insertable end and a little on yourself. Avoid silicone-based lube, which can degrade the silicone surface over time. Keep the lube bottle within reach; reapply rather than pushing through dryness.
  3. Test the 10 modes externally first: Turn on the toy and cycle through all 10 modes against your hand or thigh. Note which patterns feel best and how loud each one is. This step prevents surprise during insertion. If you share walls, identify the quietest satisfying mode now.
  4. Choose your end and position: For solo play, lie on your side and insert the end that feels most comfortable, keeping the other end accessible for your hand. For couples, decide together which end goes to which partner and who holds the toy. A common mistake is rushing insertion; go slowly and stop if you feel resistance. Agree on a pause signal before you start if playing with a partner.
  5. Adjust modes during use: Start on a low steady mode and change settings as you warm up. The control button is usually near the base, so keep a finger on it. If the toy slips, turn it off before repositioning to avoid accidental mode changes. Switch to a patterned mode only after you are comfortable with steady vibration.
  6. Clean and dry after every use: Wash the toy with warm water and mild soap, rinse, and pat dry with a clean towel. Because it is IPX7 waterproof, you can rinse it under the tap, but never submerge the charging port area longer than needed. Store it separately from other silicone toys to prevent material interaction. Leave the charging port cover open to air-dry completely before storing.

Product facts