Quick answer
The Dr Stone Senku sleeves are standard-sized (66 mm wide, 92 mm long) and fit most Magic: The Gathering-sized cards, including many anime card games. Before sleeving a full deck, measure a card and test one sleeve to confirm the fit.
Why standard size is not one universal size
Standard size covers a range, not a single exact dimension. A card that is slightly wider or taller than typical may still fit, but it can be tight or leave little room for a second sleeve. The Senku sleeves list 66 mm by 92 mm, which is a common standard-size sleeve dimension, but your card's actual size is the deciding factor.
If your cards are Japanese-sized (often around 63 mm by 88 mm) or Yu-Gi-Oh!-sized, these sleeves will likely be too loose. This guide focuses on standard-size cards; for other sizes, check a dedicated fit guide.
When double-sleeving changes the fit
Double-sleeving adds thickness and can make a standard-size outer sleeve feel tight. The Senku sleeves are 66 mm by 92 mm, so if you plan to use inner sleeves, test one card first. A perfect fit for single-sleeving may become too snug for double-sleeving, especially with thicker inner sleeves.
Also consider that double-sleeving can make shuffling harder and increase the deck's overall size. If you need to double-sleeve, choose thin inner sleeves and check that the card still slides in without forcing it.
Step-by-step fit check
- Measure one card: Use a ruler to measure the width and height of a single card from your deck. Compare it to 66 mm by 92 mm. If your card is wider than 66 mm or taller than 92 mm, these sleeves will not fit. Measure at least three cards from the deck; slight manufacturing variance can affect fit.
- Test one sleeve: Take a single Senku sleeve and slide one card in. It should go in smoothly without bending. If the card catches or requires force, stop and reassess. Never force a card; a tight fit can damage edges.
- Check the overhang: With the card fully inserted, look at how much sleeve extends beyond the top of the card. A small, even overhang (about 1–2 mm) is normal. If the sleeve is much longer, the card may shift; if there is no overhang, the card is too tall. Compare overhang on multiple sleeves; inconsistent overhang may indicate miscut sleeves.
- Try double-sleeving (if needed): If you plan to double-sleeve, put your card into your chosen inner sleeve first, then insert it into the Senku sleeve. Check that it still slides in without excessive force and that the inner sleeve does not bunch up. If double-sleeving feels too tight, consider single-sleeving or using thinner inner sleeves.
- Shuffle test: Sleeve a small stack of about 10 cards and shuffle gently. The sleeves should slide against each other without sticking or tearing. If shuffling is difficult, the fit may be too tight or the sleeves may be incompatible with your inner sleeves. Shuffle test before sleeving your entire deck to avoid wasting sleeves.
Product facts
-
Sleeves - Officially Licensed Dr Stone Sleeves - Senku: Officially licensed Dr Stone Senku sleeves, 60 per pack, 66 mm wide and 92 mm long. The 60-count suits a typical constructed deck plus a few spares, and the listed dimensions let you compare against your cards before buying.
Sleeves - Officially Licensed Dr Stone Sleeves - Senku
