Quick answer

Clean your drip tip weekly with warm water and mild soap, rinse and air-dry fully, then check the O-rings and fit before reinstalling. Replace the tip when the seal, bore, or resin surface shows wear that cleaning cannot fix.

Why resin and metal tips need different handling

Resin tips such as the iTank 2 Resin Drip Tip are decorative and comfortable, but they can scratch if you scrub them with abrasive pads. Metal or precision-made tips like the ARMOUR G Series Drip Tip tolerate a firmer clean but still depend on their O-rings for a secure seal.

The practical difference is in the drying and inspection stage: resin rewards a soft cloth and a full air-dry, while metal tips let you focus on the seal and bore. Neither type needs harsh chemicals, and both last longer when you avoid soaking them in alcohol for long periods.

Fit and comfort checks before you clean

A tip that wobbles or sits too loose is usually an O-ring problem, not a cleaning problem. Before washing, twist the tip gently to feel for play, and look at the O-rings for flattening, cuts, or residue. If the tip spins freely, stop and inspect the seal first.

Comfort is personal: an 8mm bore feels more open than a narrower MTL-style opening, so choose the tip that matches how you vape rather than forcing a loose fit with extra pressure.

When cleaning stops being enough

Cleaning restores airflow and taste, but it cannot repair a torn O-ring, a cracked resin shell, or a bore that has become permanently clogged with baked-on residue. If the tip still tastes stale after a full clean and dry, or if it no longer seals, replacement is the honest fix.

Keep a spare tip on hand so a worn seal does not sideline your setup while you order a replacement.

Step-by-step drip tip care routine

  1. Remove and disassemble: Twist the drip tip off the tank or pod and set aside any removable O-rings only if your model allows it. Common mistake: pulling at an angle and stretching the O-ring instead of lifting straight up. If the tip resists, stop and check for residue or a misaligned O-ring before forcing it.
  2. Rinse with warm water and mild soap: Use lukewarm water and a drop of mild dish soap. Swirl the tip for 30 seconds, then rinse thoroughly. Common mistake: using hot water or harsh cleaners that can dull resin or degrade O-rings. Keep the water lukewarm, not hot, and never boil or microwave the tip.
  3. Clean the bore with a soft brush: Pass a soft brush or pipe cleaner through the bore to lift residue, then rinse again. Common mistake: scrubbing the resin exterior with an abrasive pad, which scratches the pattern. Clean the inside firmly and the outside gently.
  4. Air-dry completely: Shake off excess water and leave the tip on a clean cloth until fully dry, especially inside the bore and around the O-rings. Common mistake: reinstalling a damp tip, which traps moisture and can affect flavor. If you see water droplets in the bore, it is not dry yet.
  5. Inspect O-rings and fit: Look for cuts, flattening, or residue on the O-rings, then reinstall the tip and twist gently to confirm a snug fit. Common mistake: ignoring a loose fit and tightening the tank harder to compensate. A tip that spins freely needs a new O-ring or a replacement tip, not more torque.
  6. Replace when wear is permanent: Replace the tip if the seal fails after cleaning, the resin is cracked, or the bore stays restricted. Common mistake: continuing to vape through a damaged tip and blaming the coil for poor flavor. Keep a spare tip so a worn seal never leaves you without a usable setup.

Product facts

  • iTank 2 Resin Drip Tip: The iTank 2 Resin Drip Tip is a 17mm-tall 810 tip with an 8mm bore, a colorful resin pattern, and a double O-ring seal. The double O-ring gives a secure fit, while the wide 8mm bore suits a more open draw and the resin surface needs gentle cleaning to keep its pattern intact.

    iTank 2 Resin Drip Tip

    iTank 2 Resin Drip Tip

  • ARMOUR G Series Drip Tip: The ARMOUR G Series Drip Tip comes as a 2-pack with both DTL and MTL types. Having both draw styles in one pack lets you match the tip to your airflow preference and keep a spare ready when one needs cleaning or replacement.

    ARMOUR G Series Drip Tip

    ARMOUR G Series Drip Tip