Two Different Paths to Deep Bass

If you are building a high-performance home theatre or stereo system, adding a subwoofer is one of the most impactful upgrades you can make. Dynaudio offers two very different solutions: the Sub 6, a standalone powered subwoofer designed for seamless integration with Dynaudio speakers, and the S4-LCR65W, an in-wall subwoofer module that is part of the Custom Studio series. This comparison focuses on their design philosophy, installation requirements, and integration capabilities to help you decide which fits your space and system.

At a Glance: Key Differences

  • Dynaudio Sub 6 Subwoofer: The Sub 6 uses two brand-new 24cm MSP+ Hybrid Drive units alongside a 500W power amplifier built into its base. This is a complete, self-powered subwoofer with its own amplification and DSP, ready to place in a room.

    Dynaudio Sub 6 Subwoofer

    Dynaudio Sub 6 Subwoofer

  • Dynaudio Studio Series S4-LCR65W In-Wall Subwoofer: The S4-LCR65W is a modular in-wall subwoofer module designed to fit between standard American 16in on-center wall studs. It is a passive module that requires external amplification and is part of a larger in-wall system, not a standalone unit.

    Dynaudio Studio Series S4-LCR65W In-Wall Subwoofer

    Dynaudio Studio Series S4-LCR65W In-Wall Subwoofer

Design and Installation

The Sub 6 is a sealed enclosure subwoofer that stands wider than it is deep, designed to sit discreetly against a wall. It comes in Satin Black or Satin White finishes and connects via dual RCA and XLR inputs. Installation is straightforward: place it, connect it, and use the on-screen menu to set it up.

The S4-LCR65W is an in-wall module that requires cutting into drywall and mounting between studs. It uses the same clamp-and-lock mechanism as other Dynaudio Custom Studio speakers, making it part of a modular array. It is not a standalone subwoofer; it is designed to be combined with separate woofer and tweeter modules to form a complete LCR system. Installation is more involved and best handled during construction or renovation.

  • Sub 6: Standalone, powered, floor-standing subwoofer. Easy placement and connection. No wall modifications needed.
  • S4-LCR65W: In-wall passive subwoofer module. Requires wall cutting, external amplification, and integration with other Custom Studio modules.

Integration and Compatibility

Integration is where these two subwoofers differ most. The Sub 6 features advanced intelligent DSP that can automatically adjust time and phase delays based on the distance from the sub to the speakers. For Dynaudio Contour, Confidence, Evidence, Special Forty, and Special Twenty-Five speakers, it can even turn a two-way system into a three-way system by matching its roll-off perfectly. For other speakers, including non-Dynaudio models, you can set crossover, gain, and phase manually. It also includes a fully parametric EQ with three filters to counter room modes.

The S4-LCR65W is a passive module with no built-in DSP or automatic room correction. It includes a rear switch to match power settings to the number of woofer modules used, and a passive filter bypass setting for active configurations. Its integration is manual and depends on your external amplifier and processor. It is designed for use within a complete Custom Studio system, not as a standalone sub.

  • Sub 6: Automatic DSP integration with Dynaudio speakers, parametric EQ, and firmware updates for future models. Works with any system via manual settings.
  • S4-LCR65W: Manual integration only. Requires external crossover and room correction. Best suited for a full Custom Studio in-wall system.

Which One Should You Choose?

Choose the Dynaudio Sub 6 if you want a high-performance standalone subwoofer with advanced DSP that integrates seamlessly with Dynaudio speakers, or if you need a flexible sub that can work with any system. It is ideal for rooms where you can place a subwoofer on the floor and want automatic room correction and future-proofing via firmware updates.

Choose the Dynaudio S4-LCR65W if you are building a custom in-wall home theatre and want a clean, invisible installation. It is a component of a larger system, not a standalone product, so it makes sense only if you are committing to a full Custom Studio LCR array. It offers no automatic room correction, so you will need to handle that through your processor or amplifier.

Honest Trade-Offs

  • Dynaudio Sub 6 Subwoofer: The Sub 6 is designed to integrate seamlessly with all Dynaudio speakers, with a special trick for Contour, Confidence, Evidence, Special Forty, Special Twenty-Five models. This deep integration is a major advantage if you own or plan to own those speakers, but less relevant for other brands.
  • Dynaudio Studio Series S4-LCR65W In-Wall Subwoofer: The S4-LCR65W is part of a modular system; its tweeter modules can be placed either way up and a rear switch lets you match power setting to the number of woofer modules. This flexibility is useful for custom installs, but the lack of built-in DSP means you must rely on external equipment for room correction.