What the Broadway 2025 Edition Is Designed For

The Eleven Audio Broadway Balanced Headphone Amplifier 2025 Edition is a fully balanced, discrete class A headphone amplifier. It is designed to deliver smooth, detailed sound with very low noise, making it a strong candidate for high-end headphone systems. This guide covers the essential setup steps based on the supplied specifications.

Step-by-Step Setup

  1. 1. Choose your balanced source: The Broadway accepts only stereo balanced 3-pin XLR inputs. Your source (e.g., a DAC or preamp) must have balanced XLR outputs. Unbalanced RCA or single-ended connections cannot be used directly.
  2. 2. Connect the AC power: The amplifier requires a standard grounded IEC C13 AC cord (not included). The supplied AC charge adaptor works with 100-240 VAC, 50-60 Hz. The unit has built-in battery management and will charge automatically.
  3. 3. Power on and select operation mode: The Broadway can run on internal batteries for up to 6 hours (with four replaceable Li-Ion 18650 batteries) or indefinitely while connected to AC power. The circuitry floats the batteries on mains for clean sound in either mode.
  4. 4. Connect your headphones: Use the 4-pin balanced XLR or 4.4 mm Pentaconn headphone output. The amplifier delivers 1.5 watts at 32 ohms in fully balanced class A operation.
  5. 5. Adjust volume and listen: A high-quality volume adjust potentiometer controls output level. Start at a low setting and increase gradually to avoid hearing damage.

Key Specifications at a Glance

Pairing with ABYSS Diana Headphones

The Broadway 2025 Edition was designed using ABYSS Diana series headphones and is highly recommended for them. The supplied information notes that JPS Labs UltraConductor 2 Balanced XLR cables are recommended for the best sonic match. The amplifier's 1.5-watt class A output provides ample headroom for the Diana's planar magnetic drivers.

Placement and Physical Considerations

The amplifier measures 8.3 in (212 mm) wide, 6.1 in (156 mm) deep (190 mm including the volume knob), and 1.9 in (48 mm) tall. It weighs approximately 1150 grams with batteries. Ensure your setup has adequate ventilation around the chassis, as class A operation generates heat. The unit should be placed on a stable, level surface.

What the Supplied Information Does Not Cover

The supplied records do not specify gain settings, impedance matching for specific headphone models beyond the Diana, or detailed battery replacement instructions. For very demanding headphones, the manufacturer recommends considering the Eleven Audio Formula S Amplifier instead.