Quick answer
The Alice21 Studio Ellen Joe 2.0 is a 1/6 scale resin statue that rewards careful handling and a stable display spot. Follow the steps below to keep its painted details and pose looking their best.
Why the Ellen Joe 2.0 needs a dedicated display spot
At 19cm tall with a base roughly 20cm wide, the Ellen Joe 2.0 has a compact footprint but a wide stance. You need about 25cm of shelf depth so the base and any trailing effects sit safely without overhanging.
Because it is a resin statue with delicate painted edges, avoid high-traffic areas where it could be bumped. A dedicated shelf or display case also reduces dust buildup, which is the main enemy of resin finishes.
Trade-off: resin detail vs. everyday durability
Resin captures sharp sculpted lines and subtle paint gradients better than most PVC figures, which is why the Ellen Joe 2.0 shows off fine costume details and hair strands so well. The trade-off is that resin is more brittle if dropped or knocked over.
That means the display spot matters more than for a standard figure. Choose a stable surface away from edges, and if you have pets or kids, consider a closed display case.
Display and care steps for the Ellen Joe 2.0
- Choose a stable, low-traffic shelf: Place the statue on a flat, level surface that is at least 25cm deep and away from doorways or busy walkways. Make sure the base sits fully on the shelf with no overhang. Check that the shelf is level before placing the statue; a slight tilt can make the wide base look off.
- Position lighting to avoid glare and heat: Use a cool LED spot or strip light aimed at the front of the statue from a 45-degree angle. Avoid direct sunlight or hot halogen bulbs, which can fade paint and stress the resin over time. Test the light angle before leaving it on; if you see a strong glare on the face, adjust the direction.
- Dust with a soft brush, not a cloth: Use a wide, soft makeup brush or a dedicated anti-static brush to gently sweep dust off the resin surfaces. For the base, a microfiber cloth works, but avoid rubbing painted edges. Never use water or cleaning sprays on the painted areas; dry dusting is enough for regular upkeep.
- Inspect the base and joints monthly: Every few weeks, check that the base is still level and that no parts have loosened or shifted. If the statue has a separate base or support peg, make sure it is seated fully. If you notice any wobble, stop handling it and check the peg connection before returning it to the shelf.
About the Ellen Joe 2.0 statue
-
[US in Stock, displayed] Alice21 Studio - Statue - Zenless Zone Zero - Ellen Joe 2.0: This Alice21 Studio statue is 1/6 scale, measures 19cm high, and is made from imported resin, PU, and ABS. The mixed materials mean you can dust the base with a soft cloth but should use a gentle brush on the resin parts to avoid scratching the paint.
[US in Stock, displayed] Alice21 Studio - Statue - Zenless Zone Zero - Ellen Joe 2.0