Two Approaches to a Better Shift Feel
ACUITY offers two distinctive shift knobs in satin finishes: the ESCO-T6 and the POCO. Both are machined from 6061-T6 aluminum with a stainless steel core, weigh about 185 grams, and thread onto M10x1.5 shifters found in most manual Hondas and Acuras. But they differ fundamentally in shape, height, and how they integrate with your shift boot.
The ESCO-T6 is a classic barrel-shaped knob (70mm tall, 40mm wide) that promotes consistent hand placement. The POCO is a low-profile, countersunk knob designed to sit just 3–4mm above the shift lever, reducing throw by 5–10% compared to a stock knob.
Your choice depends on whether you want a traditional grip that builds muscle memory or a minimal height that shortens shift travel.
Key Specs at a Glance
-
POCO Low-Profile Shift Knob in Satin Red Finish (M10X1.5): The POCO sits only 3-4mm above the top of the threaded shift lever and typically offers 5%-10% less throw than a stock knob. This low height is the POCO's main advantage for drivers who want the shortest possible shift motion.
POCO Low-Profile Shift Knob in Satin Red Finish (M10X1.5)
-
ESCO-T6 Shift Knob in Satin Black Finish (M10X1.5): The ESCO-T6 is 70mm tall and 40mm wide, with a barrel-shaped upper portion and tapered bottom. The taller shape fills the hand and encourages a consistent grip, which can improve shift accuracy over time.
ESCO-T6 Shift Knob in Satin Black Finish (M10X1.5)
-
POCO Low-Profile Shift Knob in Satin Red Finish (M10X1.5): The POCO has a built-in shift boot collar that clips into the knob for a clean, finished appearance. This integrated design eliminates the sagging boot issue common with other low-profile knobs.
-
ESCO-T6 Shift Knob in Satin Black Finish (M10X1.5): The ESCO-T6 does not include a shift boot collar; on vehicles where the boot clips to the knob, you may need a separate 1924-series collar. This adds a step (and a potential additional purchase) for newer Honda/Acura owners whose boot attaches to the knob.
ESCO-T6 vs POCO: Key Differences
The table below summarizes the main differences between these two knobs. Use it to decide which feature set matters more for your build.
- Height above shift lever: POCO: 3–4mm. ESCO-T6: approximately 70mm total height (not countersunk).
- Shift throw reduction: POCO: 5–10% shorter than stock. ESCO-T6: no throw reduction from knob alone.
- Grip shape: POCO: low, compact (countersunk). ESCO-T6: barrel-shaped, 40mm wide, promotes consistent hand position.
- Shift boot integration: POCO: built-in boot collar clips to knob. ESCO-T6: no boot collar; may need separate part for post-2010 vehicles.
- Weight: Both approximately 185 grams.
- Finish options: POCO available in satin red (1925-RD). ESCO-T6 available in satin black (1886-T6B).
- Fitment: Both fit M10x1.5 Honda/Acura manual transmissions. POCO has a specific vehicle list; ESCO-T6 fits all Honda/Acura 6-speeds.
Fitment Considerations
The ESCO-T6 is listed as fitting all Hondas and Acuras with 6-speed manual transmissions and M10x1.5 shifters. The POCO has a more detailed vehicle list that includes many models from 2002 onward, but it will not fit certain vehicles without modification. Specifically, on some shifters, two small steel bumps must be filed off the shift lever to clear the POCO's collar.
If you drive a newer Honda (e.g., 10th or 11th Gen Civic, 10th Gen Accord) or a recent Acura Integra, both knobs should work, but the POCO requires checking that your shift lever doesn't have those bumps. The ESCO-T6 is more universal in that regard.
For shift boot fitment, the POCO's built-in collar is a clean solution. The ESCO-T6 lacks this feature, so if your vehicle's boot clips to the underside of the OEM knob (common on many post-2010 models), you may need to purchase an ACUITY 1924 shift boot collar separately to prevent the boot from sagging.
Which One Should You Choose?
Choose the POCO if your priority is the lowest possible knob height and a clean, integrated shift boot appearance. The 5–10% throw reduction is a real benefit for drivers who want shorter, firmer shifts. Be prepared to verify fitment for your specific vehicle and possibly do a minor modification.
Choose the ESCO-T6 if you prefer a classic, hand-filling shape that helps train muscle memory for consistent shifts. It's a simpler, more universal install, though you may need to budget for a separate boot collar if your vehicle requires one. The satin black finish is understated and durable.
Both knobs are well-made and will improve the feel of your shifter. Your decision ultimately comes down to whether you value a lower knob height and integrated boot (POCO) or a traditional grip and easier fitment (ESCO-T6).

