What the bundle adds to your X10 Pro Omni

The eufy X10 Pro Omni White bundle pairs the robot vacuum with two bottles of floor cleaning solution and six dust bags. These extras are designed to keep your cleaning routine running smoothly, but the exact steps for using them depend on the accessories themselves. The product information for this bundle lists the main vacuum features but does not include specific instructions for the solution or bags. That means you should follow the guidance that comes with each accessory and the robot's user manual for safe use.

This article explains where these accessories fit into your setup and what to check before you start, so you can avoid common mistakes and keep your X10 Pro Omni performing well.

Key features that affect accessory use

Setting up the dust bags and cleaning solution

Because the bundle does not include specific instructions for these accessories, the following steps are general best practices. Always refer to the labels on the solution and bags, and to the X10 Pro Omni manual for exact procedures.

  1. Unpack and inspect: Check that both bottles of floor cleaning solution and all six dust bags are included and undamaged. Read any labels or warnings on the solution bottle before use.
  2. Install a dust bag in the station: Open the station's dust container according to the manual and insert a dust bag as shown. Make sure it is seated correctly to avoid leaks. The bundle gives you six bags, so you can replace them as needed.
  3. Fill the clean water tank with solution: If your model has a clean water tank for mopping, add the floor cleaning solution as directed on the bottle or in the manual. Do not overfill or mix with other chemicals unless instructed.
  4. Run a test cycle: After installation, run a short cleaning cycle to confirm the bag is properly installed and the solution is dispensing correctly. Check for any leaks or unusual noises.

Maintenance routine for your bundle accessories

To keep your X10 Pro Omni working efficiently, establish a simple routine. Replace the dust bag when it is full or according to the station's indicator. With six bags in the bundle, you have a good supply, but monitor usage based on how often you vacuum. For the cleaning solution, use it only as intended and store it safely away from children and pets. The solution is formulated for floor cleaning, so avoid using it on surfaces not recommended by the manufacturer.

Beyond the accessories, regular maintenance of the robot itself is important. The Auto-Detangling Roller Brush reduces hair wrap, but you should still remove any tangled hair or debris periodically. Wipe the sensors and charging contacts, and empty the station's water tanks as needed. These habits help maintain suction power and mopping performance.

Checkpoints after setup

  • Dust bag is secure: Ensure the bag is fully inserted and the container lid closes properly. A loose bag can cause dust to escape.
  • Solution is correctly diluted: If the solution requires dilution, follow the ratio on the label. Using it undiluted may leave residue or damage floors.
  • No leaks: After filling the tank, check for drips or puddles around the station and robot.
  • Robot completes a cleaning cycle: Run a test in a small area to confirm the robot mops and vacuums as expected.