Start with the track, not the spotlight

The Exhaust Track Linear Stone is a track spotlight, so the first fitting decision isn't about the spotlight at all. It's about the track already on your ceiling or the track you plan to install. The spotlight ships with a black 3-circuit track adapter, and the supplied information lists compatible track examples as Global, Powergear, Eutrac, Nordic and Unipro.

That list is the checkpoint to clear before you measure anything. If your existing track is not one of those systems, the adapter may not seat or may not carry current correctly, and no amount of careful spotlight spacing will fix it. Confirm the track brand and circuit type first, then move on to placement.

What the catalog confirms about this spotlight

  • EXHAUST TRACK / LINEAR / STONE: A track spotlight with a powder coated metal body and solid metal detailing. The body is metal, so the fixture has a substantial feel on the track; plan for a fixture that sits visibly rather than blending in.

    EXHAUST TRACK / LINEAR / STONE

    EXHAUST TRACK / LINEAR / STONE

  • EXHAUST TRACK / LINEAR / STONE: Comes with a black 3-circuit track adapter. The adapter is included, so you don't need to source one separately, but it must match your track system.

  • EXHAUST TRACK / LINEAR / STONE: Examples of compatible track are Global, Powergear, Eutrac, Nordic, Unipro. This is the shortlist to check against your existing or planned track before purchase.

  • EXHAUST TRACK / LINEAR / STONE: The spotlight fits a GU10 bulb, sold separately. Bulbs are not in the box, so factor a GU10 purchase into your plan and budget.

Measuring: what you can plan and what you can't

The supplied information does not give beam angle, throw distance, recommended spacing or ceiling height guidance. That means you should not treat any spacing figure as a manufacturer instruction. What you can do is measure the track run and the room, then decide how many spotlights you need based on the visual rhythm you want and the areas you need to light.

A practical approach: mark the track length, divide it into equal segments for however many spotlights you plan, and check that each position lands where you want light rather than where a joist or track joint forces it. Because the spotlight is fully adjustable, you have some freedom to aim after fitting, but the mounting position on the track is fixed once you clip it on.

A sensible order for fitting the Exhaust Track Linear Stone

  1. 1. Confirm track compatibility: Check that your track is Global, Powergear, Eutrac, Nordic or Unipro, and that it is a 3-circuit system. If you are installing new track, choose one from that list.
  2. 2. Buy GU10 bulbs: The spotlight fits a GU10 bulb, sold separately. Decide on beam type and colour temperature before you fit, because the bulb shapes the light you get.
  3. 3. Choose your finish: The detail finish comes in Brass, Burnt Steel, Gun Metal or Steel. Pick this before ordering so all spotlights on the same track match.
  4. 4. Mark spotlight positions on the track: Measure the track run and space the spotlights evenly, or according to the areas you need to light. Remember the adapter is black regardless of finish.
  5. 5. Clip the adapter onto the track: The spotlight comes with a black 3-circuit track adapter. Seat it on the track according to your track system's fitting method.
  6. 6. Insert the GU10 bulb and aim the spotlight: The spotlight is fully adjustable, so set the direction after fitting. The honeycomb filter delivers precise, low-glare, directional light.

Placement choices the design supports

The honeycomb filter is the feature that should shape where you put this spotlight. It delivers precise, low-glare, directional light, which suits areas where you want to point light at a surface without the source itself becoming a distraction. The solid metal linear-knurl baffle also captures light and creates a delicate metallic glow, so the fixture reads as a design object even when the bulb is off.

That combination points toward use over a kitchen island, along a hallway, or aimed at a wall or artwork rather than as broad ambient fill. The supplied information does not confirm wet-area rating or outdoor suitability, so keep the fitting indoors unless your track system and local regulations say otherwise.

Choosing between the four finishes

The spotlight is available in four detail finishes: Brass, Burnt Steel, Gun Metal and Steel. The supplied information does not describe how each finish ages or whether it is lacquered, so treat the choice as a visual one and check the finish against your other metalwork before ordering.

  • Brass: A warm metal tone that suits rooms with other brass or aged-metal details. The catalog does not confirm whether it is a living finish.
  • Burnt Steel: A darker, more textured look. Useful where you want the spotlight to recede against dark ceilings or joinery.
  • Gun Metal: A mid-dark grey metal that sits between steel and black. A practical choice if you want contrast without going fully dark.
  • Steel: The lightest of the metal options, matching stainless or pale metal fixtures. The most neutral choice for mixed-metal rooms.

What the supplied information does not settle

Several details you might expect in a fitting guide are not confirmed by the supplied product information: the exact adapter fitting method, maximum track load, dimming compatibility, IP rating and care instructions. That does not mean those details don't exist, only that they are not confirmed here. Check the track manufacturer's instructions for load limits and the bulb packaging for dimming compatibility before you commit to a layout.

The catalog price is USD 148.84 against a comparison price of USD 244.00, but price should not drive the decision before compatibility does. A spotlight that doesn't fit your track is no bargain at any price.