What the FireROD V2 Brings to the Field
The Exotac FireROD V2 is a compact ferrocerium rod fire starter designed for carry in a ferro-loop on a knife sheath. Its updated version keeps the simple, reliable design that outdoor users expect, while adding a replaceable rod so you don't need to discard the whole tool when the rod wears out. The tool also offers plenty of storage for tinder or water purification tablets, making it a practical addition to your field kit.
Because the supplied information does not include specific sparking angle, pressure, or scraping technique details, this guide focuses on what the design evidence supports: carrying, preparing, and using the FireROD V2 effectively with common field practices.
FireROD V2 Design Highlights
-
Exotac FireROD™ V2: The Exotac fireROD™ V2 is an updated version of the perfect fire starting tool for carry in a ferro-loop on a knife sheath. This tells you the intended carry method. If your knife sheath has a ferro-loop, the FireROD V2 fits that system without extra straps or pouches.
Exotac FireROD™ V2
-
Exotac FireROD™ V2: The ferrocerium rod is replaceable so you won't need to discard this tool when the rod is worn out. Replaceability extends the tool's lifespan. You can buy a replacement rod rather than a whole new fire starter, which is both cost-effective and less wasteful.
-
Exotac FireROD™ V2: The fireROD™ is simple in design and offers plenty of storage for tinder or water purification tablets. The storage compartment adds utility. You can keep a few tinder tabs or purification tablets inside, so you always have a dry ignition source or emergency water treatment on hand.
How to Use the FireROD V2 in the Field
The following steps are based on general ferro rod use and the design features of the FireROD V2. Always follow the manufacturer's instructions when available.
- Prepare the rod and striker: Remove the FireROD V2 from its ferro-loop or storage position. Hold the tool in your non-dominant hand with the ferrocerium rod pointing away from you. Use the included striker or the spine of a knife to scrape along the rod.
- Gather and position tinder: Open the storage compartment and take out any tinder you have stored. Place a small pile of dry tinder (such as cotton balls, dry grass, or commercial tinder tabs) at the base of where you will strike. The FireROD V2's storage can hold enough tinder for several attempts.
- Strike to create sparks: With the striker at a shallow angle, scrape firmly down the length of the ferrocerium rod. The friction will produce a shower of hot sparks. Aim the sparks directly into the tinder pile. Repeat until the tinder ignites.
- Build the fire: Once the tinder catches, add small kindling (twigs, bark, or dry leaves) gradually. Avoid smothering the flame. As the fire grows, add larger fuel. The FireROD V2 can be stored back in its ferro-loop while you tend the fire.
Carrying the FireROD V2 on Your Knife Sheath
The FireROD V2 is specifically designed for carry in a ferro-loop on a knife sheath. If your sheath has a ferro-loop, simply slide the rod into the loop until it is secure. The tool's slim profile means it won't add bulk or interfere with drawing the knife. For sheaths without a ferro-loop, you can attach the FireROD V2 to a keychain or store it in a pack pocket. The tool is available in Black, Olive Drab, and Blaze Orange color options, letting you match your gear or choose a high-visibility color for easy spotting.
What About Replacement and Maintenance?
When the ferrocerium rod wears down after many strikes, the FireROD V2's replaceable design means you can swap in a new rod rather than replacing the entire tool. The supplied information does not specify a replacement rod model or instructions, so check with the manufacturer or retailer for compatible replacement rods. Keep the rod dry and free of oil or grease, as moisture or contaminants can reduce spark output. The storage compartment should be kept clean and dry to protect your tinder or tablets.
