Quick answer

Using a 12mm to 18mm converter is a simple way to join hoses of different diameters, letting you extend your reach without replacing your existing fittings.

Why you might need a hose converter

If you have an older 12mm hose and a newer 18mm system, or you want to connect a 12mm accessory to a larger-diameter hose, a converter bridges the size gap. It saves you from buying a whole new hose or adapter set.

What the 12mm to 18mm converter includes

The Hoselink 12mm to 18mm Converter Set comes with a 12mm Accessory Connector and an 18mm Tap Connector. You simply screw the two fittings together to create a single adapter that works with hoses fitted with Hoselink connectors.

How to connect your hoses with a 12mm to 18mm converter

  1. Step 1: Attach the converter to your hose: Screw the 18mm Tap Connector end of the converter onto the 18mm hose fitting, or the 12mm Accessory Connector end onto the 12mm hose fitting. Hand-tighten only—do not use tools. Overtightening can damage the threads or O-ring.
  2. Step 2: Connect the second hose: Attach the other end of the converter to your second hose (the one with the opposite diameter). Again, hand-tighten until snug. Check that both O-rings are seated properly before tightening to avoid leaks.
  3. Step 3: Test the connection: Turn on the water slowly and inspect the joints for drips. If you see a leak, tighten slightly or disassemble and check the O-rings. A small drip usually means the O-ring is misaligned or the fitting is cross-threaded.

Product facts

  • 12mm to 18mm* Converter: The converter set contains a 12mm Accessory Connector and 18mm Tap Connector that screw together. You don't need extra parts—the two pieces combine into one ready-to-use adapter.

    12mm to 18mm* Converter

    12mm to 18mm* Converter