Quick answer

Buy lights built for your exact E-Z-GO model and trim, not a universal kit. TXT, RXV, and Marathon carts use different bezels, harnesses, and mounting points, so a kit that fits one often will not fit another. Decide whether you need headlights only, a full street-legal kit with turn signals and brake lights, or a simple tail light replacement, then match the connector type and voltage before ordering.

E-Z-GO made several carts that look similar but take completely different lighting parts. A light kit sold for a TXT will not bolt onto an RXV, and a 36V cart needs different electrical handling than a 48V one. The fastest way to waste money is to order by brand name alone.

This guide walks through the decisions that actually matter: identifying your model and trim, choosing between LED and halogen, confirming harness and connector fit, and knowing when a simple replacement light is smarter than a full kit.

Identify your E-Z-GO model before you shop

E-Z-GO TXT, RXV, and Marathon carts have different front cowls, so headlight bezels and mounting holes are not interchangeable. TXT carts span many years and body styles, while the RXV uses a distinct front end that changed again around 2008. Marathon carts are older still and rarely have factory light provisions.

Check the serial plate or sticker, usually under the dash or on the frame near the passenger side. Confirm whether your cart is gas or electric, because that affects available voltage and wiring paths. Write down the model and year range before browsing, then filter by that fitment.

  • Photograph your serial plate and current light housings before ordering.
  • If your cart has no existing light wiring, plan for a full harness, not just lamps.

Decide what the lights actually need to do

A headlight-only kit is fine for private property and dusk visibility. If you ride on or near public roads, you likely need brake lights, turn signals, and a horn to meet local requirements. That changes the kit, the harness, and sometimes the switch pod.

Tail light replacement is its own category. If your housings are intact and only the lamps or lenses are failing, a replacement assembly is cheaper and faster than a full kit. Match the connector and bezel dimensions to your existing housing.

  • List your real riding conditions first, then buy the smallest kit that covers them.
  • Street use usually means a full kit with brake and turn functions.

LED vs halogen: what changes on an E-Z-GO

LED lights draw less current, run cooler, and generally last longer than halogen. On older carts with marginal charging systems, that lower draw can matter. LED kits also tend to give a whiter, more consistent beam pattern.

Halogen still works and can cost less up front, but bulbs are consumable and heat output is higher. If you already have a halogen kit and the housings are good, replacing bulbs may be enough. If you are building from scratch, LED is usually the better long-term pick.

  • Match the kit voltage to your cart's system, typically 36V or 48V on electric models.
  • Do not assume a 12V accessory light works without a reducer or separate battery.

Fitment checks that prevent returns

The two most common fit problems are connector mismatch and bezel shape. A light with the wrong plug will not connect to your factory harness, and a bezel cut for one cowl will not sit flush on another. Check the number of pins and the connector style before buying.

Also confirm whether the kit includes screws, brackets, and a switch, or whether those are sold separately. Some listings explicitly exclude hardware, which is easy to miss until installation day.

  • Compare pin count and connector type against your existing harness.
  • Read the included-parts list carefully; hardware is often not included.

Decision rules for buying E-Z-GO lights

  • If you only need to see and be seen on private property: Choose a headlight-only LED kit for your exact model and confirm it includes a switch and wiring. Skip turn signals and brake lights unless local rules require them.
  • If you ride on or near public roads: Buy a full street kit with headlights, tail lights, brake lights, turn signals, and a horn, matched to your cart's voltage and harness. Check local lighting laws before assuming a basic kit is enough.
  • If your housings are fine but a lamp failed: Replace the individual assembly or bulb rather than the whole kit, and match the connector pin count and bezel shape. A replacement set is usually cheaper and faster than a full kit.
  • If you are unsure of your model year: Find the serial plate, confirm gas or electric, and compare your current bezel and connector to the listing before ordering. When in doubt, ask before you buy rather than after.

Product facts worth knowing

  • Yamaha Drive G29 Tail Light Replacement Assemblies LED: This set includes a pair of bright LED tail lights, one driver side and one passenger side, provisioned for park/running lights and brake/turn signals, each with a 3-pin Molex connector and thick injection molded plastic bezels. Screws are not included, and dimensions should be checked before purchase. It shows why connector type and bezel dimensions matter more than brand name. If your cart uses a different plug or cowl shape, this set will not fit even though the function matches.
  • Wood Grain Club Sport Golf Cart Steering Wheel - 12.5": This sport style wood grain and black steering wheel is a quick add-on for Yamaha, Club Car, or EZGO carts, with a flat bottom design that makes getting in and out easier. A steering wheel adapter is required when replacing an OEM wheel. It is a reminder that E-Z-GO lighting and interior upgrades often need a model-specific adapter or harness. Budget for the required adapter, not just the visible part.
  • Xtreme® Mats Golf Cart Floor Mat - EZGO RXV (2008+) / 2Five (2009+): This full coverage overlay mat protects factory flooring from dash to seat base, uses a patented custom Xtreme Clip with no tools required, is laser-measured for a snug fit around pedals and seat base, and is 8mm thick with a diamond pattern that channels away sand and water. It demonstrates the value of model-specific, laser-measured fit. The same principle applies to light kits: parts measured for your exact E-Z-GO model install cleanly, while universal parts often need modification.

Who this guide is for

Best for

  • E-Z-GO owners who know their model and want the right kit the first time
  • Riders adding lights to a TXT, RXV, or Marathon for the first time
  • Anyone replacing a failed E-Z-GO headlight or tail light assembly

Not for

  • Owners who have not identified their model and year and are unwilling to check
  • Carts that need full electrical repair before any lighting can be added
  • Buyers looking for universal lights that fit every brand without modification

Match the kit to your exact E-Z-GO model, voltage, and connector before you buy. Start with the smallest kit that covers how you actually ride, then upgrade to a full street kit only if you need it. When in doubt, check the bezel and plug first.