Why Replace the OEM Turbo Outlet Studs?
If you own a 2011-2020 Ford F-150 with the EcoBoost engine, you may already know that the OEM turbo outlet studs are a common failure point. The factory stud has only two flats on the end, requiring a specialized Ford tool or a stud extractor to remove. Even with the right tool, the stud often damages the threads or breaks entirely due to the quality of steel and machining.
The PRL Motorsports Turbo Outlet Adapter Hardware Kit directly addresses this problem. It replaces the four studs, four nuts, and two gaskets with upgraded components that let you use common hand tools for installation and removal.
What's in the Kit
-
Turbo Outlet Adapter Hardware Kit Ford F-150 (2011-2020): Contains 4 studs, 4 nuts, 2 gaskets, and a single-use anti-seize packet. Everything you need for a complete turbo outlet gasket replacement in one box. No need to source separate hardware.
Turbo Outlet Adapter Hardware Kit Ford F-150 (2011-2020)
-
Turbo Outlet Adapter Hardware Kit Ford F-150 (2011-2020): Studs are made from 303 stainless steel for corrosion and heat resistance. 303 stainless resists rust and heat better than the OEM steel, giving a longer reusable lifetime.
-
Turbo Outlet Adapter Hardware Kit Ford F-150 (2011-2020): Each stud has a 6mm hex on the head and a 15mm hex on the center portion. The 6mm hex lets you hold the stud stationary while removing the downpipe nut. The 15mm hex allows installation and extraction with a common wrench or socket—no special tools needed.
Installation Overview
The supplied information does not include a step-by-step torque sequence, but the kit's design makes the process straightforward for anyone familiar with turbo outlet service. Below are the general steps based on the kit's features.
- Remove the downpipe and old gaskets: Access the turbo outlet area on your F-150 EcoBoost. Unbolt the downpipe and remove the old gaskets. The OEM studs may break during removal—this is expected and the reason for upgrading.
- Extract broken or damaged OEM studs: Use the 15mm hex portion on the new studs as a reference: the kit is designed so you never need a stud extractor again. For removal of old studs, a standard stud extractor or the specialized Ford tool may still be required if they are seized.
- Apply anti-seize and install new studs: Apply the supplied anti-seize to the turbo threads to prevent galvanic corrosion. Thread each new 303 stainless stud into the turbo using the 15mm hex portion. Tighten to a snug fit—the catalog does not specify a torque value, so follow the turbo manufacturer's specs if available.
- Install new gaskets and nuts: Place the new gaskets over the studs. Secure the downpipe with the new nuts. Use the 6mm hex on the stud head to hold the stud stationary while torquing the nut. This prevents the stud from spinning and ensures proper clamping force.
Compatibility and Fitment
This kit is designed for the 2011-2020 Ford F-150 with the EcoBoost engine. It fits both 2.7L and 3.5L variants, as the turbo outlet hardware is shared across these model years. If you have a 2021 or newer F-150, the turbo outlet design may differ—check your specific application before purchasing.
The kit includes two gaskets, enough for a single turbo outlet service. If you are servicing both turbos on a 3.5L, you will need two kits.
