Before You Begin: Know Your FAROL Double Configuration

The FAROL Double wall light is a solid brass fixture with two cylindrical hand-blown glass shades from Poland. Before any wiring or mounting, you need to confirm two things: the orientation (left or right) and the glass type (opal or smoked). These are not just aesthetic choices—they determine which side of the light the shades extend from and how the fixture fits your space.

The FAROL Double is available in three brass finishes: Brushed Brass, Antique Brass, and Dark Bronze. Each finish pairs with either opal or smoked glass, and each combination comes as a left-hand or right-hand configuration. The orientation is fixed at the factory, so choose your configuration carefully before ordering.

FAROL Double Wall Light at a Glance

  • FAROL DOUBLE: Crafted entirely from brass, the Farol Wall Double balances its bold lines with delicate cylindrical glass shades. The all-brass construction means the fixture is heavy and requires secure mounting. Ensure your wall can support the weight and that you have appropriate fixings for your wall type.

    FAROL DOUBLE

    FAROL DOUBLE

  • FAROL DOUBLE: With opal or smoked glass options, this light comes in right-hand or left-hand configurations, offering adaptability for any design scheme. The orientation is not adjustable after purchase. Measure your space and decide which side the shades should extend to before you order.

  • FAROL DOUBLE: The hand-blown glass shades from Poland reflect generations of craftsmanship, with unique air pockets adding a touch of individuality to each piece. Each shade is unique. Small air pockets and subtle variations are part of the character, not defects. Handle the glass with care during installation.

Wiring and Electrical Considerations

The FAROL Double is a mains-wired fixture. All wiring work must be carried out by a qualified electrician in accordance with local regulations. Do not attempt to modify the internal wiring or change the orientation yourself.

The supplied product information does not specify the number of bulbs or the maximum wattage. Before installation, check the fixture itself for a label or consult your electrician to confirm the correct bulb type and wattage. Using the wrong bulb could damage the fixture or create a safety hazard.

If you are replacing an existing wall light, ensure the wiring in your wall is compatible and in good condition. A qualified electrician can verify this and make any necessary adjustments.

Installation Steps

  1. 1. Confirm orientation and glass type: Double-check that you have the correct left-hand or right-hand configuration for your space. Hold the fixture up to the wall to visualize the shade placement before mounting.
  2. 2. Turn off power at the circuit breaker: Safety first. Ensure the power to the circuit is completely off before any work begins. Use a voltage tester to confirm.
  3. 3. Mount the fixture securely: The all-brass construction makes this a heavy light. Use appropriate wall anchors and screws for your wall type (plaster, drywall, masonry, etc.). The fixture should feel solid and level.
  4. 4. Connect the wiring: Have your electrician connect the fixture wires to the house wiring using wire nuts or approved connectors. Follow standard color coding (black/red to live, white to neutral, green/bare to ground).
  5. 5. Attach the glass shades: Carefully install the hand-blown glass shades. Handle them gently to avoid damage. The shades should fit snugly but not be over-tightened.
  6. 6. Restore power and test: Turn the power back on and test the light. If it does not work, turn off the power and check all connections.

Lead Time and Planning

The FAROL Double wall light has a standard lead time of 10 to 12 weeks plus shipping. Plan your project timeline accordingly. If you need the light by a specific date, order well in advance.

Because the orientation and finish are fixed at the factory, any changes after ordering will incur delays. Measure your space, choose your configuration, and confirm your order details before placing it.

What the Information Does Not Tell You

The supplied product information does not include the exact weight of the fixture, the number of bulbs required, or the maximum wattage per bulb. It also does not specify the IP rating (for damp or wet locations) or the exact dimensions. For these details, refer to the product label or contact the retailer before installation.

Always consult a qualified electrician for any wiring work. This guide provides general advice and is not a substitute for professional installation.