Quick answer

Fit the collar first so it's snug but allows two fingers underneath, then adjust the harness so the D-ring sits on your dog's back without rubbing. Test both by walking your dog and checking for twisting or chafing.

Why fit a collar and harness together?

Using a collar for ID tags and a harness for the leash gives you backup security and reduces strain on your dog's neck. The challenge is getting both to sit comfortably without interfering with each other.

Step-by-step fitting guide

  1. Fit the collar first: Place the collar around your dog's neck. Adjust it so you can slip two fingers between the collar and your dog's neck. A common mistake is leaving it too loose, which lets the collar slide over the head. Tighten or loosen so it stays in place without choking.
  2. Adjust the harness: Put the harness over your dog's head and buckle the belly strap. The front chest piece should sit about an inch behind the collar. Tighten the straps until the harness is snug but not digging in. Check that the D-ring sits centered on the back. If the harness twists or shifts, the belly strap is too loose.
  3. Test the combo with a walk: Attach the leash to the harness D-ring and walk your dog for a few minutes. Watch for the collar riding up toward the ears or the harness rubbing under the front legs. Re-adjust any strap that causes chafing or slipping. A well-fitted combo should stay in place without constant readjustment.

Gear that makes fitting easier

  • Reflective Harness Green 25mm (18-30" Neck, 22-31" Body): The Red Dingo Reflective Harness Green uses premium nylon webbing and a trademarked buckle bone side release buckle. The reflective webbing improves low-light visibility, and the side release buckle makes it easy to take on and off without fussing with straps.

    Reflective Harness Green 25mm (18-30" Neck, 22-31" Body)

    Reflective Harness Green 25mm (18-30" Neck, 22-31" Body)

  • Bone Yard Black Collar 15mm (5/8" Wide - 9.5-14" Length): The Red Dingo Bone Yard Black Collar is adjustable, made with premium nylon webbing and solid stainless steel D-rings. The stainless steel D-ring resists rust, so it stays secure even if your dog gets wet on walks or during play.

    Bone Yard Black Collar 15mm (5/8" Wide - 9.5-14" Length)

    Bone Yard Black Collar 15mm (5/8" Wide - 9.5-14" Length)