Quick Answer

For warped accessories, use the heat-and-cool method with warm water or a hairdryer. For broken parts, use super glue or epoxy, but know when to stop to avoid further damage. Always test on a hidden area first.

NECA figures are known for their detail, but accessories can sometimes arrive warped or break during handling. Before you panic, know that many issues are fixable at home with simple tools.

This guide walks you through common accessory problems—warping, loose joints, broken pegs, and more—and provides step-by-step solutions. We'll also tell you when to stop and consider a replacement or custom part.

Common Accessory Issues and How to Fix Them

Warped accessories, like swords or staffs, often bend out of shape due to packaging pressure. To fix, heat the part in warm (not boiling) water for 30-60 seconds, then gently straighten it while holding under cool water. Repeat if needed.

Broken pegs or joints are trickier. If a peg snaps inside a hole, use a tiny drill bit or a heated pin to extract it. For clean breaks, apply a small amount of super glue or two-part epoxy, hold for 60 seconds, and let cure for 24 hours.

  • Use warm water, not boiling, to avoid melting details.
  • For stubborn warps, use a hairdryer on low heat, keeping it moving.
  • Always let glue cure fully before posing the figure again.

When to Stop and Seek Alternatives

Not every accessory is worth repairing. If the part is severely damaged, missing, or the repair would compromise articulation, consider replacement. NECA does not sell individual parts, but you can find custom parts on third-party sites or use a donor figure.

Also, know your skill level. If you're not comfortable with drilling or gluing, it's better to stop and ask a professional or find a replacement. Over-repairing can ruin a valuable figure.

  • Check if the figure is still under warranty or return policy.
  • For rare or expensive figures, seek professional repair services.
  • Keep spare parts from broken figures for future fixes.

Diagnosis: Is It Fixable?

  • Symptom: Accessory is bent, warped, or has a loose joint. Often fixable at home with heat or glue.
  • Likely Cause: Packaging pressure, temperature changes, or normal wear. Prevent by storing figures in a cool, dry place.
  • Corrective Action: Use warm water or hairdryer for warps; super glue for breaks. Test on hidden area first.
  • Stop Point: If the part is severely damaged or repair risks further breakage. Seek replacement or custom part instead.

Products Mentioned in This Guide

  • Toony Terrors - Texas Chainsaw Massacre 50th Anniversary Pretty Woman Leatherface 6" Scale Action Figure: This stylized Leatherface figure includes a chainsaw accessory, which can be prone to warping in packaging. If your chainsaw arrives bent, use the warm-water method to straighten it without damaging the cartoonish paint.
  • A Christmas Story - Old Man 8” Clothed Figure: This figure comes with two interchangeable heads and a Leg Lamp accessory, which is delicate. The Leg Lamp's thin base can warp; handle with care and fix with gentle heat if needed.

With patience and the right technique, most NECA accessory issues can be resolved. Remember to assess the damage, choose the appropriate fix, and know when to stop. Happy collecting!