Quick answer

A wired shutter release bypasses the camera's internal delay circuits and lets you trip the shutter without touching the body. For Sony Alpha and Minolta Dynax shooters, the TS 1 shutter cable connects directly to the camera's remote port and provides instant, vibration-free triggering.

What shutter lag feels like

You press the shutter button and the camera takes a noticeable moment to fire. The delay can be fractions of a second, but in fast-moving scenes it means missed shots. This lag is often worse in live view mode or with older DSLRs and mirrorless cameras that process the image before opening the shutter.

Why a wired remote fixes it

A wired remote sends a direct electrical signal to the shutter mechanism, skipping the camera's internal button processing and any pre-release metering delays. It also eliminates finger pressure on the camera body, which is a common source of micro-shake in long exposures or telephoto shots. For cameras that lack a 2-second self-timer or electronic shutter option, a wired release is the most reliable fix.

When a wired remote is not the answer

If your camera's lag is caused by slow autofocus hunting, a slow memory card buffer, or a dying battery, a wired release won't help. In those cases, check your focus mode, upgrade your SD card, or replace the battery first. Also, if your camera has no wired remote port, you'll need an adapter or a different solution entirely.

Diagnosis: Is a wired remote your fix?

  • Symptom: Shutter fires noticeably after pressing the button, especially in live view or burst mode. Check if the delay is consistent or only happens in certain modes.
  • Likely cause: Internal button processing delay or camera shake from pressing the shutter. A wired remote bypasses the button and isolates vibration.
  • Corrective action: Connect a wired shutter release like the TS 1 shutter cable for Sony to the camera's remote port. Test in a controlled shot; if lag disappears, the remote is the fix.
  • Stop or choose another option: If lag persists after using the remote, the issue is not shutter delay. Check autofocus, buffer speed, or battery health. Consider a camera body upgrade or service if those components are the bottleneck.

Product facts

  • Tripod Spares : TS 1 SHUTTER CABLE FOR SONY CAMERAS: Fits the Alta GH-300T and GH-300T to allow use of the trigger system with legacy Sony Alpha such as a99, a77 etc., plus Minolta Dynax legacy film and digital bodies. If you shoot with older Sony or Minolta gear, this cable lets you use a modern trigger system without upgrading your camera body.