Quick Answer
Most HG Battlogue Livelance Heaven issues come from nub marks, tight joints, or misaligned parts. Fix them with careful sanding, joint adjustment, and proper assembly—stop if parts are warped or broken.
Why the HG Livelance Heaven Needs Extra Care
The Battlogue Livelance Heaven HG is a High Grade kit from the Battlogue series, known for its unique design. Like many HGs, it has small parts and tight tolerances, so common issues like loose joints or stiff movement can appear if you don't handle nubs and seams carefully.
Because it's a distinctive mobile suit variant, some parts may have unusual shapes that make alignment tricky. Taking your time during assembly prevents most problems.
Diagnosis and Fix Guide
- Symptom: Loose joints: If arms or legs flop, the joint may be worn or the peg isn't fully seated. Disassemble, apply a thin layer of super glue or nail polish to the peg, let it dry, and reassemble. If the joint is cracked, stop and replace the part. Test the joint after each coat—too much glue can make it too stiff.
- Symptom: Stiff or hard-to-move parts: Tight joints often result from paint or nub residue. Sand the peg lightly with fine-grit sandpaper, then apply a tiny drop of silicone grease. If the part still won't move, stop—forcing it can break the joint. Always sand in small increments and test frequently.
- Symptom: Parts won't fit together: Misaligned pieces usually come from leftover nubs or mold flash. Trim carefully with a hobby knife, then dry-fit before applying glue. If parts still don't align, check for warping—if warped, stop and consider replacing the part. Dry-fit first; gluing misaligned parts makes fixes harder.
About This Kit
-
Battlogue Livelance Heaven HG: This Battlogue Livelance Heaven HG is part of the Battlogue series, offering a distinctive build for Gundam enthusiasts. The unique design means some joints and parts fit differently than standard HGs, so troubleshooting requires a bit more patience.
Battlogue Livelance Heaven HG