Quick answer
Most Lollipop deck problems—stickiness, warping, or rough edges—are caused by the B9 Superlux finish reacting to humidity or handling. Simple cleaning, flattening, or edge smoothing usually fixes them.
Why the Lollipop deck behaves differently
The Lollipop deck uses a B9 Superlux finish, which gives it a glossy, smooth feel ideal for cardistry and magic. However, this coating can attract oils from your hands or become tacky in humid conditions. The custom tuck box with spot UV raised details also adds texture that may catch on other cards if the edges are not perfectly aligned.
None of these issues mean the deck is defective. They are common with premium finishes and usually resolve with a few simple steps.
When to stop and consider a different deck
If your Lollipop deck has persistent warping after flattening or the stickiness returns immediately after cleaning, the finish may have been exposed to extreme heat or moisture. In that case, the deck may not recover fully. The Lollipop is designed for indoor use at normal room temperatures. If you need a deck for outdoor or high-humidity environments, consider a standard Bicycle deck instead.
Diagnosis & fixes for Lollipop deck problems
- Sticky cards: Symptom: Cards cling together or feel tacky. Likely cause: Oils from your hands or humidity. Corrective action: Wipe each card gently with a dry microfiber cloth. For persistent stickiness, lightly dust with cornstarch and wipe off excess. Stop if: The tackiness returns immediately after cleaning—the finish may be compromised.
- Warped cards: Symptom: Cards bow or do not lie flat. Likely cause: Uneven moisture absorption or pressure in the tuck box. Corrective action: Place the deck under a heavy book for 24 hours at room temperature. If warping remains, rotate the deck 180° and press again. Stop if: Warping does not improve after 48 hours—consider replacing the deck. Check the deck after 24 hours before applying more pressure.
- Cards catching or sticking together at edges: Symptom: Cards snag when shuffling or fanning. Likely cause: The spot UV raised details on the tuck box may have transferred residue, or the card edges are slightly rough. Corrective action: Rub the edges of the deck gently against a smooth, clean surface (like a desk) for 10 seconds. Wipe with a dry cloth. Stop if: The snagging persists after cleaning—the UV details are part of the design and may catch on some cardistry moves.
Product facts
-
Lollipop: Made in Belgium by Cartamundi with B9 Superlux Finish & Matte Custom Tuck with spot UV raised details. The B9 Superlux finish gives the deck its smooth handling for cardistry but requires care to avoid stickiness from oils or humidity.
Lollipop