Start with the seven figures and their props
Flamecraft Dragon Miniatures Series 2 is a set of seven color miniatures, each depicting a specific character such as Hot Dog, Starburst, and Thistle. The figures range from 35mm to 40mm and come with bespoke props, including a freshly baked loaf, a special Flamecraft gem, and a spade with a tiny snail friend. Because these are detailed display pieces as much as game upgrades, the way you handle and store them matters more than with plain tokens.
The set is designed as an upgrade for Flamecraft, but the supplied information does not include a manufacturer care or safety sheet. The tips below focus on practical habits that protect small, detailed parts; they are not official instructions. When in doubt, treat the figures gently and avoid harsh chemicals.
What the set includes
-
Flamecraft - Dragon Miniatures Series 2: Seven 'Series 2' color miniatures ranging from 35-40mm, depicting characters such as Hot Dog, Starburst, and Thistle. Knowing the count and scale helps you plan storage that keeps each figure and its prop separate.
Flamecraft - Dragon Miniatures Series 2
-
Flamecraft - Dragon Miniatures Series 2: Each dragon comes with bespoke props, including a freshly baked loaf, a special Flamecraft gem, and a spade with a tiny snail friend. Small props are the easiest parts to lose or break, so they deserve their own compartment.
A simple handling routine for game night
These steps assume you are using the miniatures during play and want to avoid wear between sessions.
- Set up on a clean, dry surface: Clear crumbs, drinks, and loose dice from the play area before placing the dragons. The 35–40mm scale means a tipped cup can easily knock several figures at once.
- Keep props paired with their dragon: The loaf, gem, and snail-spade are unique to specific characters. After a game, return each prop to its figure before packing up so pieces do not migrate between compartments.
- Pick up by the base, not the wings or props: The supplied information does not describe attachment points, so avoid pulling on thin or protruding details. Lifting from the base is the safest habit for any miniature.
- Count the set before storage: Do a quick seven-figure count plus a prop check at the end of each session. This catches losses early, while the missing piece is still likely to be on the table or floor.
Storage that protects small props
The goal is to stop figures from rubbing against each other and to give tiny props a fixed home. The supplied information does not specify a case or foam type, so choose storage that fits the 35–40mm scale and keeps each piece separated.
- Use a compartmented box: A craft or tackle box with adjustable dividers lets you give each dragon its own slot. Keep the smallest props in a separate small container inside the box so they do not rattle against the figures.
- Avoid loose bagging: A single bag for all seven figures and their props invites scratches and bent details. If you must bag them, use individual soft pouches and keep props in a labeled mini bag.
- Store away from heat and direct sun: The supplied information does not state a temperature range. As a general precaution, keep the set out of hot cars and sunny windowsills, where soft plastics can warp over time.
- Label the box: Write “Flamecraft Series 2 – 7 dragons + props” on the lid. It sounds trivial, but it prevents the set from being mistaken for generic game bits and tossed into a mixed bin.
Display ideas that keep the detail visible
Because each figure has its own bespoke prop, a display shelf can tell a small story: the loaf near Hot Dog, the gem near its character, and the snail-spade set beside Thistle. A tiered acrylic stand or a shallow shadow box keeps the 35–40mm figures at eye level without crowding. Leave a finger-width between figures so you can lift one out without knocking its neighbor.
If you display the set on a shelf, avoid placing it where direct sunlight hits for hours each day. The supplied information does not confirm UV resistance, so shade is the cautious choice. A closed display case also reduces dust, which is harder to remove from deep detail than from a smooth surface.
Painting prep without guessing at the material
The set is described as color miniatures, so painting is optional. The supplied information does not name the plastic or confirm primer compatibility, so test any product on a hidden area first.
- Wash and dry before painting: Mold release agents can prevent paint from sticking. A gentle wash with mild soap and water, followed by thorough drying, is a common prep step. Do not soak the figures or use hot water, since the supplied information does not confirm heat tolerance.
- Prime a test patch first: Spray or brush primer on the underside of a base before committing to a full figure. This checks adhesion without risking a visible area.
- Paint props separately or mask them: The loaf, gem, and snail-spade are small and easy to smear. Either paint them before attaching them to the dragon or use a small brush and steady hand to work around them.
- Seal only after full cure: A varnish can protect paint during handling, but follow the product’s own instructions for cure time. The supplied Flamecraft information does not recommend a specific sealer.
The product behind these tips
- Flamecraft - Dragon Miniatures Series 2: Flamecraft - Dragon Miniatures Series 2 is a seven-figure upgrade set with color miniatures and character-specific props. This is the exact set these handling, storage, and display habits are written for.
- Flamecraft - Dragon Miniatures Series 2: The miniatures range from 35mm to 40mm, a scale that fits standard compartment boxes and display stands. Use the size range when choosing foam, dividers, or a shelf layout rather than guessing from photos.



