What a Flash Snoot with Grid Does for Your Speedlight
A flash snoot narrows your speedlight's beam into a tight circle, making it easy to highlight a single subject detail or create a dramatic accent. The Fotodiox Flash Snoot with 20° Grid for Speedlite adds a removable honeycomb grid that further tightens the beam to about 20 degrees, giving you even more control over where the light falls. This is the kind of modifier you reach for when you want a sharp, focused pool of light—not a broad wash.
The snoot attaches to your flash head with a Velcro strap and includes a diffusion dome for softening the output when you don't need the grid. The honeycomb grid itself has cells roughly 1/4 inch wide, which helps produce that characteristic patterned falloff.
Attaching and Using the Snoot
Follow these steps to get the snoot onto your speedlight and start shaping light.
- Check your flash dimensions: The snoot is designed for flash units that measure roughly 2 inches tall by 3 inches wide. If your speedlight is larger, you may still be able to use it, but the supplied information notes that modification by the user may be required.
- Attach the snoot with the Velcro strap: Wrap the included Velcro strap around the flash head and the snoot's opening. The strap should hold the snoot securely in place without blocking any of your flash's controls or vents.
- Choose your insert: The snoot comes with a 20° honeycomb grid insert and a diffusion dome insert. Use the grid when you want a tight, directional beam with a slight grid pattern in the falloff. Use the diffusion dome when you need a softer, more even circle of light from the snoot.
- Position the light: Because the snoot concentrates light into a small area, it works well as a hair light or accent light in portrait and beauty setups. Place the flash at a distance that matches the size of the highlight you want—closer gives a smaller, more intense spot; farther spreads the beam slightly.
- Adjust the grid angle: The honeycomb grid is removable, so you can rotate it to change the pattern orientation. Each comb inside the grid is about 1/4 inch wide, which affects how the light falls off at the edges of the beam.
When to Use the Grid vs. the Diffusion Dome
The grid insert gives you maximum directionality. Use it when you want to isolate a single subject from the background—think rim light on a portrait subject's hair, or a dramatic spotlight on a product detail. The diffusion dome, on the other hand, softens the beam's edges while still keeping the light concentrated. It's a good middle ground if you want the snoot's shaping without the hard-edged pattern of the grid.
Both inserts are included, so you can switch between them quickly during a shoot without changing modifiers.
Product Evidence at a Glance
-
Fotodiox Flash Snoot with 20 Degree Grids for Speedlite Flash - Including Nikon, Canon, Vivitar, Sunpak, Nissin, Sigma, Sony, Pentax, Olympus, and Panasonic Speedlight Flashes: The snoot includes a removable 20-degree honeycomb grid cap and a diffusion dome insert. You get two light-shaping options in one package, letting you switch between a tight grid pattern and a softer diffused beam.
Fotodiox Flash Snoot with 20 Degree Grids for Speedlite Flash - Including Nikon, Canon, Vivitar, Sunpak, Nissin, Sigma, Sony, Pentax, Olympus, and Panasonic Speedlight Flashes
-
Fotodiox Flash Snoot with 20 Degree Grids for Speedlite Flash - Including Nikon, Canon, Vivitar, Sunpak, Nissin, Sigma, Sony, Pentax, Olympus, and Panasonic Speedlight Flashes: Designed for flash units roughly 2 inches tall by 3 inches wide. This size covers most standard speedlights from Nikon, Canon, Sony, and others. Larger units may need user modification.
-
Fotodiox Flash Snoot with 20 Degree Grids for Speedlite Flash - Including Nikon, Canon, Vivitar, Sunpak, Nissin, Sigma, Sony, Pentax, Olympus, and Panasonic Speedlight Flashes: The honeycomb grid has cells approximately 1/4 inch wide. The cell size determines the beam's spread and the pattern of light falloff. A 1/4-inch cell gives a noticeable grid texture at the edges of the beam.
-
Fotodiox Flash Snoot with 20 Degree Grids for Speedlite Flash - Including Nikon, Canon, Vivitar, Sunpak, Nissin, Sigma, Sony, Pentax, Olympus, and Panasonic Speedlight Flashes: Limited 2-Year Manufacturer Warranty from Fotodiox. You have two years of coverage against manufacturing defects, which is standard for a modifier at this price point.
What the Supplied Information Does Not Cover
The product record does not specify maximum flash power or duration limits for the snoot. If you are using a high-power speedlight or a studio strobe, check that the ABS plastic body can handle the heat output over long sessions. The record also does not include instructions for mounting the snoot on non-standard flash heads, so you may need to experiment with the Velcro strap or add your own padding for a secure fit.
All pictures in the product listing are for illustration purposes only, so the actual snoot may vary slightly in design due to ongoing improvements.
