What This Mount Kit Does

The Trak Racer Left and Right Side Flight Sim Mount Kit is designed to add joystick and throttle mounts to both sides of an aluminium profile cockpit. It includes two robust 200 mm supports and mounting plates, letting you position flight controls exactly where you need them for a realistic setup.

This kit works with 8 mm T-slot aluminium profiles, including all Trak Racer extrusion frames (TR200, TRA, TR160, TR120, TR80S, TR40S, TRK) and other branded extrusion rigs. Before ordering, check that your rig uses standard 8 mm T-slot profiles and that the 200 mm height suits your seating position.

Kit Specifications at a Glance

Installation Steps

The following steps are based on the supplied product information. For full details, refer to the included instructions.

  1. Check compatibility: Confirm your rig uses 8 mm T-slot aluminium profiles. If your product is not listed, contact Trak Racer to verify fitment.
  2. Position the supports: Attach the two aluminium profile supports to the left and right sides of your cockpit frame using the supplied brackets and hardware. Adjust the height and angle for comfortable reach.
  3. Mount the control plates: Secure the flight sim mounting plates to the supports. These plates provide the attachment points for your joystick and throttle bases.
  4. Install your flight controls: Mount your joystick and throttle units onto the plates. The kit allows you to adjust both joystick and throttle positions for optimal comfort and functionality.

Compatibility Notes

The mount kit is compatible with a wide range of flight control systems, including Thrustmaster HOTAS Warthog, T.16000M, TCA Quadrant Airbus Edition; Logitech Saitek X52, X56, Flight Throttle Quadrant; Honeycomb Alpha Yoke, Bravo Throttle Quadrant; Virpil MongoosT-50; VirtualFly TQ6 PLUS, TQ3 PLUS; and Winwing F18 Handle + T2 Throttle Base.

If your specific flight control model isn't listed, contact Trak Racer to confirm compatibility before purchasing. The supplied information does not cover every possible device, so it's best to verify.

What the Supplied Information Leaves Open

The product description does not specify exact torque settings for the bolts, nor does it provide a step-by-step assembly sequence beyond the general instructions. For precise installation, use the hardware included in the box and follow the manual that comes with the kit.

The mount kit comes with a 5-year warranty, reflecting Trak Racer's confidence in its build quality. If you have questions about fitment on a non-standard rig, reach out to their support team.