Quick Answer

Follow this guide to swap the chassis and top deck on your Carrera Ford F-150 Raptor (183006) using the replacement part (SKU 370410317).

Why Replace the Chassis or Top Deck?

Over time, the chassis can crack from hard landings or the top deck may warp under stress. The replacement part (Chassis + Top Deck for Ford F-150 Raptor, 183006) is a direct fit for the Carrera model, so you don't need to modify other components.

Tools You'll Need

You'll need a small Phillips-head screwdriver, a pair of tweezers or needle-nose pliers for small screws, and a clean workspace. A magnetic screw tray helps avoid losing hardware.

Step-by-Step Replacement Process

  1. Step 1: Remove the Body and Electronics: Take off the Ford F-150 Raptor body shell by gently prying the clips. Disconnect the battery and unplug the receiver, servo, and ESC wires. Remove the screws securing the electronics tray and lift it out. Common mistake: pulling wires without noting their positions. Take a photo before disconnecting.
  2. Step 2: Disassemble the Old Chassis and Top Deck: Unscrew the screws holding the top deck to the chassis. Separate the top deck and then remove the screws attaching the chassis to the suspension arms and drivetrain. Keep screws organized by location. Checkpoint: if screws are tight, use a properly sized screwdriver to avoid stripping the heads.
  3. Step 3: Install the New Chassis: Place the new chassis (from the replacement set) onto the work surface. Reattach the suspension arms and drivetrain components in the same order you removed them. Tighten screws evenly but don't overtighten. Common mistake: overtightening can crack the plastic. Snug is sufficient.
  4. Step 4: Attach the New Top Deck: Align the new top deck over the chassis and secure it with the original screws. Ensure the top deck sits flush and doesn't obstruct any moving parts. Checkpoint: rotate the wheels by hand to confirm no binding before reinstalling electronics.
  5. Step 5: Reinstall Electronics and Test: Place the electronics tray back, reconnect the servo, ESC, and receiver wires per your photo. Insert the battery, attach the body shell, and power on. Do a low-speed test drive to verify steering and throttle response. Common mistake: forgetting to secure wires away from gears. Use zip ties if needed.

Product Details

  • Chassis + Top Deck for Ford F-150 Raptor (183006): This is a replacement chassis and top deck set for the Carrera Ford F-150 Raptor, part number 183006, under SKU 370410317. It's a direct-fit part, so you won't need to drill new holes or modify the RC body.

    Chassis + Top Deck for Ford F-150 Raptor (183006)

    Chassis + Top Deck for Ford F-150 Raptor (183006)