Set up the station so the two machines hand off to each other
The Perfect Bottle Prep Bundle pairs two machines that solve different halves of the same job: the Formula Pro Advanced makes a warm formula bottle on demand, and the Bottle Washer Pro takes the dirty bottle off your hands afterwards. A daily routine works best when you place them close enough that a used bottle goes straight from the feeding area into the washer without a detour.
The Formula Pro Advanced needs its water tank filled and its airtight formula container loaded with approximately 700g of powdered formula. The Bottle Washer Pro needs its removable clean and dirty water tanks in place and a baby-safe Baby Brezza Detergent Tablet in the wash. Neither machine needs plumbing, so you can position them on a counter near a socket rather than next to a sink.
What each machine contributes to the routine
-
PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro: Formula Pro Advanced automatically mixes formula and water to a warm bottle using patented mixing technology, with three temperature settings: room temperature, body temperature, and warmer than body temperature. This is the bottle-making half of the routine, so you can choose a consistent serving temperature without hand-measuring powder each time.
PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro
-
PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro: Bottle Washer Pro automatically washes, sterilises and dries bottles, pump parts and sippy cups using 20 high-pressure spray jets. This is the cleaning half of the routine, covering the bottles and parts the Formula Pro Advanced has just been used with.
The daily loop: make, feed, load, run
- 1. Make the bottle: Use the Formula Pro Advanced digital controls to dispense a warm formula bottle. The machine dispenses formula or water only in 30 ml increments from 60–300 ml, so choose the closest increment to the feed you intend to serve.
- 2. Feed, then move the dirty bottle to the washer: Once the feed is finished, take the bottle and any used parts directly to the Bottle Washer Pro. The washer holds up to 4 bottles, pump parts and accessories, so you can batch a few feeds rather than running it after every single bottle.
- 3. Load with the right detergent: The Bottle Washer Pro works only with baby-safe Baby Brezza Detergent Tablets. A free 60-count pack is included with the bundle, so keep the tablets stored next to the machine so they go in with the load.
- 4. Choose a cleaning mode: Pick from six modes: Wash-Sterilise-Dry, Wash-Dry, Wash Only, Sterilise-Dry, Sterilise Only, or Dry Only. For a full routine after formula feeding, Wash-Sterilise-Dry covers washing, steam sterilising and drying in one run.
- 5. Plan around the cycle time: The full wash cycle takes 19 minutes, the sterilise cycle takes 9 minutes, and the dry cycle takes 60 minutes, for 88 minutes total. Start the load when you do not need the bottles back immediately, such as after the last evening feed.
Where the routine needs a deliberate check
The Formula Pro Advanced does not sterilise milk formula with water at 70 degrees Celsius. If your preparation process depends on a hot-water sterilising step for the powder, this machine is not the appliance that performs it, and you should follow the formula manufacturer's instructions for that step separately.
The Bottle Washer Pro fits virtually all bottles and most pump parts and sippy cups, but it excludes Nanobebe Breastmilk Bottles, wearable pump parts and straw cups. Check your bottle and pump parts against that list before you build the whole routine around loading them into the washer.
Keep the station running smoothly
- Deal with residual water: Residual water may occasionally remain in curved areas of bottles and accessories after drying. Tilt the products inside the machine to let the water run off and prevent water spots.
- Watch for hard-water residue: If your home has hard water or well water, mineral residue may be left on products after drying. The supplied guidance recommends using a water softener or distilled water with the machine to prevent this.
- Descale when residue builds: Baby Brezza Descaling Tablets are available for descaling the Bottle Washer Pro. Keep the water tanks removable and clean so the clean and dirty tanks stay easy to swap.
- Use the dishwasher-safe water tank: The Formula Pro Advanced water tank is dishwasher-safe, which makes the weekly deeper clean easier to fold into the same routine.
Bundle facts that shape the daily routine
- PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro: The Formula Pro Advanced works with virtually all formula brands and all bottle brands and sizes. You are not locked into one formula or bottle type to keep the routine consistent.
- PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro: The Bottle Washer Pro uses 50% less water than hand washing and kills 99.9% of germs with steam, then dries with HEPA-filtered hot air. This is the cleaning and drying performance the routine relies on, and it explains why the dry cycle is the longest part of the run.
- PERFECT BOTTLE PREP BUNDLE: Formula Pro Advanced + Bottle Washer Pro: Buying the bundle includes fast and free shipping and a free 6-month extended warranty in addition to the standard 12-month warranty. Both machines are covered under the same purchase, so support questions about either half of the routine go through one warranty.
What the supplied information does not confirm
The supplied product information does not include a preparation sequence for the Formula Pro Advanced beyond the 30 ml increment range and the three temperature settings, so follow the user manual for first-time setup and formula loading. It also does not confirm a specific HEPA filter replacement interval or a descaling frequency for the Bottle Washer Pro. Treat those as manual-check items rather than guessing a schedule.
