Two Power Levels, One Platform
The DS18 FRP series gives you two compact full-range monoblock options: the FRP-5K rated at 5,000 watts RMS @ 1-ohm and the FRP-8K1 delivering 8,000 watts RMS @ 1-ohm. Both use Class D efficiency and a micro digital design, but the extra power comes with different electrical demands and tuning flexibility. Here is what changes between them and how to decide.
Power Output at a Glance
-
FRP Compact Full-Range Class D 1-Channel Amplifier 5,000 Watts Rms @ 1-Ohm: 1500W RMS @ 4-Ohm; 2900W RMS @ 2-Ohm; 5000W RMS @ 1-Ohm; 5600W RMS @ 1-Ohm (BURST) The FRP-5K provides a clear power curve from 4-ohm to 1-ohm, making it suitable for systems that need flexibility in subwoofer or midbass impedance.
FRP Compact Full-Range Class D 1-Channel Amplifier 5,000 Watts Rms @ 1-Ohm
-
FRP Compact Full-Range Class D 1-Channel Amplifier 8,000 Watts Rms @ 1-Ohm: 8000W RMS @ 1-ohm The FRP-8K1 focuses its full output at 1-ohm, ideal for builds that demand maximum power from a single subwoofer or a low-impedance array.
FRP Compact Full-Range Class D 1-Channel Amplifier 8,000 Watts Rms @ 1-Ohm
Tuning and Filter Options
The FRP-5K features variable full crossover filters and band-pass adjustments, allowing it to work for bass, mids, or highs depending on your setup. The FRP-8K1 provides a fully variable low-pass filter (10Hz–2kHz), a subsonic filter (10Hz–80Hz), and a 12dB bass boost centered at 50Hz. If you need to dial in a precise subwoofer response, the FRP-8K1 gives you dedicated subsonic control. If you want the option to run midrange or full-range, the FRP-5K offers more crossover flexibility.
Installation and Power Requirements
Both amps are compact for their output class. The FRP-5K uses Tiffany RCA terminals and DS18 recommends dual input power and ground terminals due to the high amperage draw. The FRP-8K1 comes with 0GA power inputs and an onboard smart cooling fan. Neither amp includes detailed wiring instructions in the supplied information, so plan your power cable and fuse rating based on your vehicle's electrical system. The FRP-8K1's higher RMS output will demand a stronger alternator and battery setup.
FRP-5K vs FRP-8K1: Key Differences
- RMS Power @ 1-Ohm: FRP-5K: 5000W RMS (5600W BURST) | FRP-8K1: 8000W RMS
- Crossover Flexibility: FRP-5K: Variable full crossover with band-pass for bass/mids/highs | FRP-8K1: Low-pass (10Hz–2kHz), subsonic (10Hz–80Hz), bass boost at 50Hz
- Cooling System: FRP-5K: Protective PCB coating and bonded components | FRP-8K1: Smart cooling fan plus thermal/short/overload protection
- Inputs: FRP-5K: Tiffany RCA terminals, dual power/ground recommended | FRP-8K1: Tiffany RCA terminals, 0GA power inputs
- Price: FRP-5K: $349.98 (was $699.95) | FRP-8K1: $449.98 (was $899.95)
Which One Should You Choose?
Pick the FRP-5K if you want a versatile amp that can drive subwoofers, midbass, or full-range speakers, and you have a moderate electrical system that can handle its 5000W RMS demand. Choose the FRP-8K1 if your build is focused on maximum subwoofer output at 1-ohm, you need subsonic filtering, and you have the electrical capacity to support 8000W RMS. Both amps share DS18's Class D efficiency and compact footprint, so the real trade-off is between power ceiling and tuning range.

