Match the fin set to your airframe first
The FS-2.26" BBX 29mm and FS-TLOC4 fin sets serve different airframes, so the first decision is not which fin looks better but which one fits the rocket on your bench. The FS-2.26" BBX 29mm is built for a 2.26" diameter BBX 29mm airframe and is compatible with the LOC Precision BBX 29mm model. The FS-TLOC4 is sized for LOC Precision 4-inch diameter airframes and its fin tabs are designed to reach a 29mm motor tube.
If your airframe is the BBX 29mm, the FS-2.26" BBX 29mm is the direct match. If you are building a 4-inch LOC Precision rocket with a 29mm motor mount, the FS-TLOC4 is the relevant set. The two are not interchangeable because the airframe diameters differ.
What each listing confirms about fit
-
FS-2.26" BBX 29mm: Fits the 2.26" diameter BBX 29mm rocket airframe and is compatible with the LOC Precision BBX 29mm model. This is the defining compatibility statement for the FS-2.26" BBX 29mm set; if your airframe is not the BBX 29mm, this set is not the intended fit.
FS-2.26" BBX 29mm
-
FS-TLOC4: Compatible with LOC Precision 4-inch diameter airframes, with fin tabs designed to fit 29mm motor tubes. The FS-TLOC4 is specified for a larger airframe and a 29mm motor mount, so confirm both before ordering.
FS-TLOC4
Fin count, thickness, and tab sizing side by side
The listings give enough detail to compare quantity and construction, but they do not provide every dimension a scratch builder might want. Use the confirmed values below and treat anything not listed as something to verify with the airframe in hand.
- FS-2.26" BBX 29mm: Each set includes four fins, manufactured by LOC Precision. The listing confirms fit for the 2.26" diameter BBX 29mm airframe and compatibility with the LOC Precision BBX 29mm model. Fin thickness is not stated in the supplied record.
- FS-TLOC4: Three pairs (six fins total) of 1/8-inch thick T-LOC fins. Compatible with LOC Precision 4-inch diameter airframes, with fin tabs sized to reach a 29mm motor tube.
Which set matches your build
- Choose FS-2.26" BBX 29mm if: You are building or repairing the 2.26" diameter BBX 29mm rocket and need a four-fin set from LOC Precision for a direct replacement or spare.
- Choose FS-TLOC4 if: You are working with a LOC Precision 4-inch diameter airframe and a 29mm motor tube, and you want six 1/8-inch thick fins with tabs designed to reach that motor tube.
- Do not substitute one for the other: The airframe diameters differ (2.26" versus 4-inch), and the supplied records do not claim cross-compatibility. Ordering the wrong set means the fins will not match the airframe or the intended motor tube reach.
What the listings do not confirm
Neither supplied record includes installation instructions, adhesive recommendations, or a full dimensional drawing. The FS-2.26" BBX 29mm record does not state fin thickness, root chord, span, or tab dimensions. The FS-TLOC4 record confirms 1/8-inch thickness and tab sizing for a 29mm motor tube but does not give individual fin dimensions or a step-by-step installation sequence.
That absence is a limit of the supplied information, not a statement that the manufacturer provides nothing. Before you commit, dry-fit the fins against your airframe and motor tube and check the tab reach and root profile. If you need dimensions beyond what is listed, measure your own airframe and motor mount rather than assuming the fins will match a different build.

