What the FS-Scout Fin Set Includes

The FS-Scout fin set from LOC Precision is a replacement or upgrade component for model rocket builders. The set includes three fins, providing a complete set for your build. Each fin has a 1/8-inch thickness for durability.

Key Specifications for Your Build

  • FS-Scout: Fits LOC 2.56-inch diameter airframes. Confirms the airframe size you need for a proper fit.

    FS-Scout

    FS-Scout

  • FS-Scout: Fin tabs are sized to reach a 29mm motor tube. Ensures the fin tabs will contact the motor tube for through-the-wall construction.

  • FS-Scout: Includes a quantity of 3 fins for a full set. A complete set for a three-fin rocket configuration.

Fin Installation Steps

The supplied information does not include a full assembly manual, but you can follow these general steps based on the fin set's dimensions and typical LOC Precision build practices. Always refer to your rocket kit's instructions for specific steps.

  1. 1. Prepare the airframe: Dry-fit the fins into the slots of your 2.56-inch diameter airframe. Check that the fin tabs align with the 29mm motor tube slot.
  2. 2. Dry-fit the motor tube: Insert the 29mm motor tube into the airframe. The fin tabs should reach the tube, allowing you to glue the fins directly to the motor tube for added strength.
  3. 3. Glue the fins: Apply epoxy or your preferred adhesive to the fin tabs and the root edge. Insert each fin into its slot, ensuring it is square to the airframe. Use a fin alignment jig if available.
  4. 4. Apply fillets: Once the fins are set, apply epoxy fillets along the fin-to-body joints. The 1/8-inch thickness of the fins provides a good base for fillets.

First Flight Preparation

Before your first launch, confirm that the motor mount is secure and that the recovery system is properly packed. The supplied information does not include specific recovery or motor retention details for the FS-Scout fin set alone, so follow your rocket kit's instructions for those steps. A careful pre-flight check of fin alignment and glue joints will help ensure a stable flight.

What the Catalog Does Not Cover

The product record for the FS-Scout fin set does not include instructions for motor retention, recovery system setup, or recommended motor sizes. These details depend on the specific rocket kit you are building. If you are using the fin set as a replacement, refer to the original kit's manual or consult experienced builders for motor and recovery recommendations.