Why Sensor Clean Solution for Full Frame Sensors
VisibleDust Sensor Clean Solution (15ml) is formulated to remove water-based stains and light dust contamination from camera sensors. It also offers dust repellent and anti-fogging properties, making it a versatile choice for routine sensor maintenance. Importantly, Sensor Clean is non-flammable and non-alcoholic, and it can be shipped by air without restrictions.
For full frame sensors, the correct companion swab is the MXD-100 Green Vswab. The product record specifies that Sensor Clean should be used ONLY with MXD-100 Green swabs. Using other swabs may compromise cleaning effectiveness or safety.
Product Facts for Sensor Clean Solution
-
VisibleDust Sensor Clean Solution (15ml): Removes water-based stains and light dust contamination. Ideal for the most common sensor issues—dust spots and water marks—without harsh chemicals.
VisibleDust Sensor Clean Solution (15ml)
-
VisibleDust Sensor Clean Solution (15ml): Non-flammable and non-alcoholic; can be shipped by airplane. Safe to travel with and store, and no special handling required.
-
VisibleDust Sensor Clean Solution (15ml): Compatible with MXD-100 Green swabs ONLY. Using the wrong swab may cause streaking or damage; always pair with the specified green swab.
Wet-Cleaning a Full Frame Sensor with Sensor Clean Solution
The following steps are based on the supplied product evidence. Always work in a clean, dust-free environment and ensure your camera battery is charged.
- 1. Prepare the swab: Take one MXD-100 Green Vswab. Apply 2–3 drops of Sensor Clean Solution to the swab tip. Do not oversaturate; the swab should be damp, not dripping.
- 2. Access the sensor: Set your camera to manual sensor cleaning mode (refer to your camera manual). This lifts the mirror (if DSLR) and opens the shutter, exposing the sensor.
- 3. Wipe the sensor: Gently drag the damp swab across the sensor in one smooth, straight motion from one side to the other. Do not apply pressure. Use the swab's V-shape to maneuver inside the chamber.
- 4. Inspect and repeat if needed: After the first pass, inspect the sensor with a sensor loupe. If marks remain, use a fresh swab and repeat step 3. Do not reuse a swab that has already touched the sensor.
- 5. Final check: Allow the sensor to dry for a few seconds (Sensor Clean evaporates quickly). Close the camera and take a test shot at a small aperture (f/16 or f/22) against a plain white surface to confirm cleanliness.
Compatibility and Safety Notes
VisibleDust liquid cleaners, including Sensor Clean, are safe for use on all digital SLR and mirrorless cameras, according to the supplied evidence. They are also safe on both ITO and non-ITO-coated sensors.
The MXD-100 Green Vswab is designed with a patented V-shape and mini-channels for even saturation and maneuverability inside the camera chamber. The double-layer High Absorbency fabric is soft and leaves no fibers.
One limitation: the supplied information does not specify how many wet passes Sensor Clean can handle before needing reapplication. For persistent stains, consider a second pass with a fresh swab.
