Start with a count, not a drill

A trade pack of 24 knobs is a fixed quantity, so the first job is to match that number to your kitchen before you think about placement. Walk the room and list every cabinet door and drawer front that needs a knob. Count each one once. If the total is close to 24, the pack is a natural fit. If it is well under, you will have spares for future furniture projects. If it is over, you need to decide which cabinets get the new knobs first.

The Buster + Punch ROW cross-shaped furniture knob comes as a pack of 24 unboxed units, ready for immediate installation. That unboxed format is useful on a kitchen job because you can sort the knobs by room or cabinet run before fitting begins.

What the trade pack gives you

How to plan the knob layout before fitting

The supplied product information does not include a drilling template, screw length, or a recommended spacing measurement. Use the steps below as a planning sequence, and confirm fixing details against your cabinet fronts and the hardware you receive.

  1. Count every cabinet front: List doors and drawers separately. A 24-knob pack covers 24 fronts, so decide early whether any fronts will be left without a knob.
  2. Group by cabinet run: Divide the 24 knobs across runs, for example base cabinets, wall cabinets, and drawers. This prevents running short in one area.
  3. Decide the placement rule: The catalog does not specify a mounting position. Choose a consistent position across similar fronts, such as a set distance from the opening edge, and apply it uniformly.
  4. Mark, then check: Mark each front before drilling. Check the mark against the adjacent cabinet so the knobs read as a set rather than a series of one-offs.
  5. Fit and review: Install the knobs, then open and close each front to confirm the knob position feels natural in use.

Choosing between Smoked Bronze and Steel

The ROW cross knob is offered in Smoked Bronze and Steel. The decision is mostly about how the knob sits against your cabinet finish and the other metal in the room. Smoked Bronze is the warmer, darker option; Steel is the cooler, brighter one. Before committing all 24 knobs, hold one of each against a cabinet door in the actual kitchen light. The cross design is simple and classic, so the finish will do most of the visual work.

If the kitchen already has other Buster + Punch hardware, match the finish family where you can. If not, pick the finish that contrasts least with the cabinet color you have chosen.

What the supplied information does not confirm

The catalog does not state screw length, fixing type, or a recommended distance from a cabinet edge. It also does not give a load rating or a suitability statement for children. Treat these as details to confirm with the cabinet maker or the hardware supplied with your order rather than assumptions to build into the plan.

The pack is described as ready for immediate installation, but that does not remove the need to check the fixing against your particular cabinet front. If your doors are unusually thin or thick, resolve the fixing question before drilling.

Trade pack versus buying knobs individually

  • Trade pack of 24: One pack covers a whole kitchen or a multi-room furniture project, with unboxed units ready to sort. Best when your count is close to 24.
  • Individual knobs: Better when you need only a handful of knobs or want to test a finish before committing to a larger order.