Quick answer
To use your Fyr Kerosene Lamp, fill the reservoir with clean kerosene, trim the wick to about 1/8 inch, let it soak, then light and adjust the flame. Always place it on a stable, heat-resistant surface and keep it away from drafts.
Why wick trimming matters for a clean burn
A properly trimmed wick is the difference between a steady, bright flame and a smoking, uneven one. Trimmed wicks produce less soot and last longer, while a long or jagged wick can cause flickering and smoke. Check the wick before every lighting—it takes seconds and saves cleanup later.
Fuel choices and safety basics
Use only clear, high-quality kerosene (also called paraffin oil). Never use gasoline, alcohol, or other fuels not intended for oil lamps—they are dangerous and can damage the lamp. Store kerosene in a labeled container away from heat sources. When filling, work in a well-ventilated area and wipe up spills immediately.
Indoor vs. outdoor use
The Fyr Kerosene Lamp gives a gentle warm yet clear light both indoors and outdoors, but it should only be used outdoors if standing in a not-too-windy environment. Wind can cause the flame to smoke or blow out, so choose a sheltered spot. Indoors, keep it away from curtains and other flammable materials.
Step-by-step: Fill, light, and maintain your Fyr Lamp
- Fill the reservoir: Remove the burner and fill the reservoir with clean kerosene to about 2/3 full. Use a funnel to avoid spills. Common mistake: overfilling can cause leaks when the fuel warms and expands. Leave room for expansion and wipe up any drips immediately.
- Trim the wick: Use sharp scissors to trim the wick to about 1/8 inch (3 mm). Make a straight cut. Common mistake: a long or uneven wick causes smoke and an unstable flame. Trim before every lighting for the cleanest burn.
- Soak the wick: Let the wick soak up fuel for at least 10 minutes before lighting. This helps it light easily and burn steadily. Common mistake: lighting a dry wick can cause it to burn unevenly or go out. Wait until the wick is fully saturated.
- Light the lamp: Replace the burner and chimney, then light the wick with a long match. Adjust the wick height to control flame size. Common mistake: lighting with the chimney off can cause soot buildup. Keep the flame low when first lighting, then adjust.
- Maintain regularly: After each use, let the lamp cool, then wipe the chimney with a soft cloth. Trim the wick as needed and check for fuel leaks. Common mistake: neglecting the wick leads to poor performance. Clean the chimney weekly if used often.
Product facts
-
Fyr Kerosene Lamp: A modern take on the classic kerosene lamp, providing gentle warm yet clear light. This means you get both ambiance and usable illumination, making it suitable for dining tables or reading nooks.
Fyr Kerosene Lamp
-
Fyr Kerosene Lamp: Suitable for indoor and outdoor use if standing in a not-too-windy environment. You can move it to a sheltered patio or balcony, but avoid exposed windy spots to prevent smoking or blowouts.
