Quick Answer

Dspiae G-16 China Red delivers a rich, opaque red finish on Gunpla when thinned properly and applied in thin layers with an airbrush.

Why Choose G-16 China Red for Gunpla

G-16 China Red is a lacquer paint from Dspiae, known for its excellent coverage and smooth finish. Its vibrant red shade works well for bold accents, base coats, or full armor repaints. Unlike some reds that require multiple coats, this paint builds opacity quickly when applied correctly.

Step-by-Step Painting Guide

  1. Prepare the Surface: Clean the plastic parts with warm soapy water or isopropyl alcohol to remove mold release agents. Sand with 600-800 grit sandpaper for better paint adhesion. Skipping cleaning can cause paint to peel or fisheye.
  2. Prime the Parts: Apply a thin coat of gray or white primer (e.g., Mr. Surfacer 1000) and let it cure fully. A white primer makes the red pop; gray works for a slightly muted tone. Uneven primer leads to uneven red coverage.
  3. Thin the Paint: Mix G-16 China Red with lacquer thinner at a 1:1.5 to 1:2 ratio (paint to thinner). Stir thoroughly until the mixture is the consistency of skim milk. Too thick causes orange peel; too thin leads to runs and poor coverage.
  4. Set Airbrush Pressure: Use 15-20 PSI for a 0.3mm or 0.4mm nozzle. Test spray on a scrap piece to confirm a fine, even mist. High pressure can blow the paint into a rough texture.
  5. Apply Thin Coats: Spray from 10-15 cm away, moving in steady passes. Apply 2-3 thin coats, allowing 5-10 minutes between coats for the solvent to flash off. Rushing thick coats causes drips and loss of detail.
  6. Let Cure and Topcoat: Allow the paint to cure for at least 24 hours. Apply a gloss topcoat (e.g., Mr. Color GX100) to protect the finish and prepare for decals or panel lining. Handling uncured paint leaves fingerprints and smudges.

Product Facts

  • G-16 China Red 18ml: Dspiae Lacquer Paint Basic Color G-16 China Red is a high-quality 18ml lacquer paint designed for model kits and hobby painting. The 18ml bottle is enough for several Gunpla projects, and the lacquer formula provides a durable, smooth finish that resists chipping.

    G-16 China Red 18ml

    G-16 China Red 18ml