Quick answer

To replace the Go Cup XL lid for 30oz cups, purchase the official Go Cup XL Lid (product ID 133714) and follow the simple swap steps below. Always verify the lid fits your specific cup model to ensure a leakproof seal.

Why lid replacement matters

A worn or damaged lid can compromise the leakproof seal of your Go Cup XL, leading to spills and reduced insulation. Replacing the lid restores the cup's performance and extends its lifespan.

The Go Cup XL lid is designed specifically for 30oz Go Cup XL models. Using a lid from a different cup size or model may not fit securely, so always check compatibility before purchasing.

Compatibility considerations

The Go Cup XL lid is not universal. It fits only Go Cup XL 30oz models, not the Classic Canteen or other Corkcicle tumblers. Verify your cup's model and size before ordering.

If you own a different Corkcicle cup, check the specific lid replacement guide for that model. Using the wrong lid can cause leaks and may damage the cup's threads.

Step-by-step lid replacement

  1. Confirm your cup model: Check the bottom of your cup or the original packaging to confirm it is a Go Cup XL 30oz. This lid will not fit other Corkcicle models. If you're unsure, measure the opening diameter and compare with the lid's specs before purchasing.
  2. Remove the old lid: Twist the old lid counterclockwise until it loosens, then lift it off. Clean the cup's rim to remove any debris or residue that could affect the seal. Inspect the old lid for cracks or warping—if damaged, replace it promptly to avoid leaks.
  3. Align the new lid: Position the new Go Cup XL lid over the cup, aligning the spout with the cup's handle (if applicable). Press down gently and twist clockwise until snug. Do not overtighten—this can damage the threads or the silicone spout.
  4. Test the seal: Fill the cup with water, close the spout, and invert it over a sink for 10 seconds. If any leaks appear, remove the lid, check the gasket, and re-seat it. If leaks persist, the lid may be defective or incompatible—contact customer support or verify your cup model again.

Product facts

  • Go Cup XL Lid - 30oz: The Go Cup XL lid is leakproof with a silicone spout and flexible handle. This design ensures a secure, spill-resistant seal while making the cup easy to carry, so you can trust the replacement to perform like the original.

    Go Cup XL Lid - 30oz

    Go Cup XL Lid - 30oz