What the Grado XLR Termination Does
The Grado Labs cable option for XLR termination puts both a male and a female XLR connector inline, a few inches above the phono plug. This design lets you use the same cable either way: plug the male end into a balanced source or the female end into a preamp or mixer, depending on your gear.
Instead of choosing one connector type at order time, this inline adapter setup gives you both options on the same cable. It is a practical solution if you switch between balanced and unbalanced systems or want one cable for multiple setups.
Grado XLR Termination Option Details
-
Terminate cable with XLR - XLR male and female connectors are inserted inline a few inches above the phono plug, so you can use it either way.: XLR male and female connectors are inserted inline a few inches above the phono plug, so you can use it either way. This confirms you get both connector genders on one cable, avoiding the need to carry adapters or swap cables when changing sources.
Terminate cable with XLR - XLR male and female connectors are inserted inline a few inches above the phono plug, so you can use it either way.
How the Inline XLR Adapter Works in Practice
The inline XLR connectors sit a few inches above the standard phono plug. In a typical setup, the phono plug connects to your turntable or phono preamp, and the XLR connectors let you attach the cable to a balanced input on a mixer, audio interface, or amplifier.
Because both male and female XLR connectors are present, you can connect the cable to a device with either a male or female XLR jack without an extra adapter. This flexibility is useful if you have gear with different XLR port configurations.
The supplied information does not specify cable length, conductor count, or shielding details. If those specs matter for your setup, you may need to check with Grado Labs directly.
What the Supplied Information Confirms (and What It Does Not)
The product record confirms the XLR termination option exists, the connectors are placed inline a few inches above the phono plug, and the cable can be used either way. It does not confirm cable length, conductor count, or compatibility with specific Grado headphone or phono models.
When evidence is sparse, the best approach is to treat this as a configuration option for custom cable orders. If you need exact measurements or model compatibility, contact Grado Labs before ordering.
