Quick answer
Use the Grimnir sleeves for standard-size cards that measure no more than 63 x 88 mm, and sleeve slowly from the bottom edge to avoid bending corners. Store them in a clean, dry deck box and keep them away from direct sunlight to preserve the artwork and shuffle feel.
Why the 66 x 92 mm sleeve size matters
The Grimnir sleeves measure 66 mm wide by 92 mm long, which gives a small margin around a standard 63 x 88 mm card. That margin helps the card slide in without forcing, but it also means an oversized or thick card will not fit cleanly. If your card is thicker than a typical trading card or has a textured back, test one sleeve before sleeving a whole deck.
Because the sleeves are officially licensed Granblue Fantasy accessories, the artwork is printed on the back. That print can show wear faster if you shuffle roughly or store the deck loose in a bag, so the fit check and care steps below are worth doing from day one.
When to double-sleeve and when to skip it
The 66 x 92 mm size leaves little room for a second sleeve. If you already use inner sleeves, they may add enough thickness to make the fit tight or cause the outer sleeve to bow. For most players, a single Grimnir sleeve is enough for casual play; if you double-sleeve, test one card first and check that the card does not stick or bend.
Skip double-sleeving if you play in humid conditions or store cards in a tight deck box, because added thickness can make the stack harder to manage. In those cases, keep the Grimnir sleeves as your outer layer and use a separate inner sleeve only if it is thin and fits without forcing.
Step-by-step: fit, sleeve, and care for Grimnir sleeves
- Measure one card: Use a ruler to confirm your card is no wider than 63 mm and no longer than 88 mm. Common mistake: assuming all anime card games use the same size without measuring a card from your actual deck. If your card is larger, choose a bigger sleeve instead of forcing it.
- Test one sleeve first: Slide a single card into one Grimnir sleeve and check that it goes in smoothly and the sleeve does not wrinkle. Common mistake: sleeving a whole deck before noticing a tight fit. A card that sticks or bends the sleeve means the size is wrong for that card.
- Insert from the bottom edge: Hold the sleeve by the edges and slide the card in bottom-first, stopping when the card is fully seated. Common mistake: pushing the card against the top edge, which can split the sleeve or nick the card corner. Leave a small gap at the top so the card does not press against the seal.
- Remove trapped air: Press gently on the sleeve to push air out before shuffling. Common mistake: shuffling immediately, which can trap air and make the deck feel uneven. A flat stack after sleeving makes shuffling more consistent.
- Store and clean: Keep sleeved cards in a clean deck box away from sunlight and moisture, and wipe the sleeve surface with a dry cloth if it gets smudged. Common mistake: storing the deck loose in a bag where corners can catch and split. Replace any sleeve that splits or becomes sticky to protect the card underneath.
Product facts
-
Sleeves - Officially Licensed Granblue Fantasy "Grimnir": Officially licensed Granblue Fantasy sleeves featuring Grimnir artwork, 60 sleeves per pack, 66 mm wide and 92 mm long. The 60-count pack covers a standard 60-card deck, and the 66 x 92 mm size is the key measurement to check against your cards before sleeving.
Sleeves - Officially Licensed Granblue Fantasy "Grimnir"
