What Makes the Guard Station 8 Different
The Guard Station 8 is a dome-style mountaineering expedition shelter designed for group camping in high-altitude, high-alpine conditions. Its external pole design gives you two setup options: you can pitch it as a free-standing group shelter or clip in the tent body to create a double-wall tent. This flexibility makes it a strong choice for groups who need a base camp that can handle extreme weather.
Key Features at a Glance
-
Guard Station 8: The Guard Station 8 features an external pole design which means it can be set up as a free-standing group shelter, or clip in the tent body to create a double-wall tent. This gives you two distinct pitching modes: a quick, open shelter for gear storage or cooking, or a fully enclosed tent for sleeping in harsh conditions.
Guard Station 8
-
Guard Station 8: The DAC exoskeleton pole system is incredibly strong and offers generous living space, with polyester rip-stop material developed to provide high UV resistance and stability in the most extreme environments. The pole system supports the tent's large interior volume while maintaining stability in high winds, and the fabric resists UV degradation at altitude.
How to Set Up the Guard Station 8
The Guard Station 8 uses an external pole system, so the poles go up first. Here is a general process based on the tent's design.
- Choose your mode: Decide whether you want a free-standing shelter (poles and fly only) or a double-wall tent (with the inner tent body clipped in). For group camping, the free-standing mode works well for a quick rain shelter or dining area, while the double-wall mode offers better condensation management and warmth for sleeping.
- Lay out the poles: The DAC exoskeleton pole system is color-coded and keyed to match the tent's corners. Spread the poles on the ground and connect each section, ensuring the tips are fully seated in the ferrules.
- Erect the frame: Insert the pole ends into the grommets at the tent corners. Lift the poles to create the dome shape. The frame should stand on its own once all poles are in place.
- Attach the fly or body: If using the free-standing mode, drape the rainfly over the frame and clip it to the poles. For double-wall mode, clip the inner tent body to the poles first, then add the fly. Ensure the fly is centered and the guy-out points are accessible.
- Stake and tension: Stake out the corners and vestibule areas. Tighten the guy lines to reduce fabric flutter in wind. The polyester rip-stop material holds tension well once properly staked.
Tips for Group Camping with the Guard Station 8
When setting up with a group, assign roles: one person lays out the poles, another stakes the corners, and a third clips the body or fly. This speeds up the process and reduces confusion. Because the tent is large, choose a flat, clear area free of rocks and roots. The free-standing mode lets you relocate the tent slightly without fully breaking down the frame—useful when you need to adjust for wind direction or drainage.
The Guard Station 8 is rated for extreme conditions, but no tent is indestructible. In sustained high winds, use all available guy points and orient the narrow end into the wind. The supplied DAC pole system is strong, but adding extra stakes on the windward side provides additional security.



