Setting Up Your Hero Holder

The Hanni Hero Holder is designed to hold your Hanni razor safely in the shower or anywhere you shave. Its structural design uses a suction cup to stick to smooth, clean surfaces, so you can display your razor proudly without hiding it in a caddy or drawer.

Before you start, make sure the surface where you plan to attach the holder is clean, dry, and free of soap scum or residue. A tile wall, mirror, or glass shower door works best. Avoid textured or porous surfaces, as the suction cup needs a smooth seal to stay in place.

How to Install the Hero Holder

Follow these simple steps to get your Hero Holder securely attached and ready for daily use.

  1. Clean the surface: Wipe the chosen area with a damp cloth to remove any dirt or soap film. Dry it thoroughly with a towel. A clean, dry surface helps the suction cup grip firmly.
  2. Press the suction cup firmly: Place the Hero Holder's suction cup flat against the surface. Press the center of the cup firmly for a few seconds to push out air and create a seal. You should feel resistance when you try to pull it off.
  3. Test the hold: Gently tug the holder to confirm it's secure. If it slides or pops off, repeat the cleaning and pressing steps. For best results, attach the holder when the surface is cool and dry.

Using the Hero Holder Daily

Once installed, the Hero Holder keeps your Hanni razor within easy reach. After each shave, rinse your razor and place it into the holder with the blade facing downward or as the holder's design positions it. The open design allows air to circulate around the razor, helping it dry between uses.

There's no need to remove the holder regularly. If you need to reposition it, simply peel the suction cup edge to release the seal, clean both the cup and surface, and reattach it following the steps above.

Hero Holder at a Glance

  • Hero Holder: Tired of hiding your razor in the shower? With the Hanni hero holder you can proudly display your Hanni razor anywhere you shave. This holder is designed for visibility and convenience, so you don't have to dig through a shower caddy or shelf to find your razor.

    Hero Holder

    Hero Holder

  • Hero Holder: Its structural design holds your Hanni safely #hanniwhere. The holder provides a secure spot that keeps your razor from falling or getting knocked over, even in a busy shower routine.

  • Hero Holder: Packaging and recycling instructions The packaging includes guidance on recycling, so you can dispose of it responsibly when the holder reaches the end of its life.

Tips for Keeping the Suction Cup Secure

Suction cups can lose grip over time due to humidity, temperature changes, or residue buildup. To maintain a strong hold, occasionally wipe the suction cup and the mounting surface with a damp cloth and dry them thoroughly. If the cup becomes warped or loses its shape, replace the holder to avoid your razor falling.

For a long-lasting setup, avoid attaching the holder to a surface that gets direct hot water spray, as extreme heat can weaken the suction. A spot slightly away from the showerhead is ideal.