Quick Answer

Set up your Gojo LED statue on a stable, dry surface away from direct sunlight, power it with the included USB or battery option, and clean it monthly with a soft brush and microfiber cloth.

Why LED statues need extra care

The integrated LED lighting in the Hollow Technique Purple effect makes this statue stand out, but it also adds a component that standard resin figures don't have. Heat and moisture are the main enemies: they can dull the resin finish or affect the LED wiring over time.

Because the LED is built into the translucent purple effect, avoid placing the statue near windows or heat sources. UV rays can yellow the resin and reduce the brightness of the effect, while heat can stress the wiring inside.

What to expect from the Fantasy Studios build

This is a detailed resin collectible, not a toy. The dynamic Gojo pose and the Hollow Purple effect are fragile points, especially the outstretched hand and the translucent energy swirls. Handle those areas by their base or thicker support points.

The catalog doesn't specify the exact power source or battery type, so check the included manual or packaging. If the LED stops working, first confirm the battery or cable connection before assuming a defect.

Setup and Care Steps

  1. Unbox on a soft, flat surface: Open the box on a table with a soft cloth or foam pad. Remove the statue by lifting the base, not the arms or the purple effect. Check for any loose parts or protective film before discarding packaging. Keep the original box and foam in case you need to move or store the statue later.
  2. Choose a safe display spot: Place the statue on a stable shelf or display case away from direct sunlight, radiators, and humid areas like bathrooms. Ensure the surface is level so the LED wiring isn't stressed by uneven weight. If the spot gets direct sunlight at any time of day, pick another location.
  3. Power the LED correctly: Use the included USB cable or insert the required batteries as per the manual. Connect the cable to a low-voltage adapter (not a fast-charge phone charger) and avoid bending the cable sharply at the statue's base. If the LED flickers, disconnect and re-seat the battery or cable before trying a different power source.
  4. Dust regularly with soft tools: Use a soft, dry microfiber cloth or a makeup brush to gently remove dust from the resin surface and the LED effect area. Do not use water, cleaning sprays, or compressed air, which can push dust into the LED seams. Dust at least once a month to prevent buildup in crevices.
  5. Clean stains without harming the LED: For stubborn fingerprints, use a slightly damp (not wet) microfiber cloth and wipe carefully, then dry immediately with a soft cloth. Avoid getting any moisture near the LED housing or power port. If a stain doesn't come off with a damp cloth, stop and consult the care instructions rather than using solvents.

Product Facts