Quick Answer

You can adjust Clotilde RX eyeglass frames at home using gentle heat, careful bending, and the right tools, but always proceed slowly to avoid damaging the wood or finish.

Why Wooden Frames Need Special Care

Clotilde RX frames are handcrafted from responsibly sourced birch wood using a multi-layer lamination process. This makes them lightweight and durable, but wood behaves differently from plastic or metal when adjusted.

Wood can crack if bent too quickly or with too much force. Always warm the frame gently before adjusting, and never use boiling water or a heat gun on high, as these can blister the finish or weaken the lamination.

When to Adjust vs. When to See a Professional

Minor tweaks—like a slightly crooked temple or loose nose pad—are safe to do at home. But if the frame is severely bent, the wood is cracked, or the hinge is damaged, take it to an optician or contact Gazal Eyecare Shop.

Attempting major repairs at home can void warranties or cause permanent damage. When in doubt, professional help is the better choice.

Step-by-Step Home Adjustment

  1. Gather Your Tools: You'll need a small Phillips-head screwdriver, a clean microfiber cloth, a bowl of warm (not hot) water, and a soft towel. Avoid using metal tools directly on the wood to prevent scratches. Check that your screwdriver fits the hinge screws before starting; using the wrong size can strip them.
  2. Warm the Frame Gently: Soak a clean cloth in warm water, wring it out, and wrap it around the temple arm you need to adjust. Hold for 30–60 seconds. This softens the wood slightly without damaging the finish. The wood should feel warm, not hot. If it's too hot to touch, let it cool a few seconds before proceeding.
  3. Adjust the Temple Arms: Hold the frame with both hands, one on the lens area and one on the temple. Gently bend the temple inward or outward in small increments. Recheck the fit after each small bend. Bend slowly and never force it. If you feel resistance, warm the area again before continuing.
  4. Adjust the Nose Pads: If your Clotilde RX has adjustable nose pads, use your thumbs to gently push them closer together or farther apart. For fixed pads, adjust the angle of the frame's bridge by applying pressure to the top of the bridge. Avoid pressing directly on the lenses; always hold the frame by the bridge or temples.
  5. Check Alignment and Fit: Place the glasses on a flat surface. The temples should sit evenly, and the frame should not rock. Put them on and check that they sit comfortably on your nose and behind your ears without pinching. If one side still sits higher, repeat the warmth and adjust step for that side only.
  6. Tighten Loose Screws: Use the screwdriver to gently tighten any loose hinge screws. Turn clockwise until snug, but do not overtighten—this can strip the threads or crack the wood around the hinge. If a screw keeps loosening, add a tiny drop of clear nail polish to the threads before tightening.

About the Clotilde RX Frames

  • CLOTILDE RX: The Clotilde RX is handcrafted from responsibly sourced birch wood using an advanced multi-layer lamination process, making it lightweight and durable. The laminated wood construction means adjustments must be gentle and gradual to avoid cracking the layers, so follow the steps below carefully.

    CLOTILDE RX

    CLOTILDE RX