Why Odd Doorways Need Special Attention

Standard doorways are usually straightforward for pressure mount gates, but odd doorways—those that are extra wide, narrow, angled, or have molding or baseboards—can make installation tricky. The key is understanding how pressure mount gates work and what adjustments you can make without compromising safety.

Pressure mount gates, like the KidCo Quick Install Gateway, use tension against the door frame to stay in place. For odd openings, you may need to use extension kits, adjust the gate's width, or find a mounting surface that provides even pressure. This guide covers practical steps for common odd doorway scenarios.

What to Know Before You Start

Before adjusting your pressure mount gate, measure the doorway opening at several points (top, middle, bottom) to find the narrowest and widest spots. Pressure mount gates work best when the opening width falls within the gate's adjustable range. The KidCo Quick Install Gateway comes in a Standard size (model RTA1037) designed to fit a variety of openings, but it may not cover every odd shape.

If the doorway is wider than the gate's maximum width, you may need a different gate or an extension. For narrow openings, check if the gate can be compressed enough. For angled frames, the gate must still sit flush against the wall on both sides to create even pressure.

Step-by-Step Adjustment for Odd Doorways

Follow these steps to adjust a pressure mount gate for an odd doorway. The process assumes you have a KidCo Quick Install Gateway or similar pressure mount gate.

  1. 1. Measure the Opening: Use a tape measure to find the width at the top, middle, and bottom of the doorway. Note the narrowest and widest points. If the difference is significant, the gate may not fit securely without additional hardware. Follow the product instructions for guidance on fit and adjustments.
  2. 2. Adjust the Gate Width: Most pressure mount gates, including the Quick Install Gateway, have a telescoping section that can be extended or compressed. Loosen the locking mechanism, slide the gate to the desired width, and tighten. Test that the gate fits snugly without forcing it.
  3. 3. Position the Gate Evenly: Place the gate in the opening so that both sides contact the door frame or wall evenly. For odd doorways with molding, you may need to position the gate slightly behind the molding or use a spacer to ensure even pressure.
  4. 4. Apply Even Pressure: The KidCo Quick Install Gateway uses Pressure-Plus Technology, which applies additional pressure to the door frame for a secure fit. Turn the adjustment knobs or handles (if present) to increase tension until the gate is firm. Avoid over-tightening, which could damage the frame.
  5. 5. Test the Gate: Once installed, push on the gate from both sides to ensure it does not shift or slide. A properly installed pressure mount gate should not move when moderate force is applied. If it does, adjust the tension or reposition the gate.

KidCo Quick Install Gateway at a Glance

  • Quick Install Gateway® Pressure Mounted Gate: The KidCo Quick Install Gateway is a pressure-mounted gate designed for doorways and room openings. It uses Pressure-Plus Technology for added security without drilling. This gate is ideal for renters or those who want a removable solution. The pressure mount design allows for easy adjustment in odd doorways, though it may not fit every non-standard opening.

    Quick Install Gateway® Pressure Mounted Gate

    Quick Install Gateway® Pressure Mounted Gate

  • Quick Install Gateway® Pressure Mounted Gate: The gate is available in a Standard size (model RTA1037) to fit a variety of openings. Knowing the available size helps you determine if this gate will work for your odd doorway. If your opening is outside the standard range, you may need a different product or an extension.

Tips for Specific Odd Doorway Types

For wide doorways: If the opening is wider than the gate's maximum width, you may need to use a pressure mount gate with an extension kit. The KidCo Quick Install Gateway's standard size may not fit very wide openings; check the product specifications for the exact width range.

For narrow doorways: Some pressure mount gates can be compressed to fit narrow openings. If the gate cannot compress enough, it may not be suitable for that doorway. Consider using a different gate designed for narrow openings.

For angled or non-square frames: Place the gate so that both sides contact the frame evenly. If the frame is angled, you may need to use shims or spacers to create a flat surface. The gate must sit flush to maintain even pressure.

For doorways with baseboards or molding: The gate's rubber pads should contact the wall or frame behind the molding. If the molding is thick, you may need to position the gate slightly behind it or use a mounting kit that bridges the gap.

What the Supplied Information Doesn't Cover

The supplied information for the KidCo Quick Install Gateway does not include specific instructions for odd doorway shapes, such as angled frames or very thick molding. For these situations, you may need to experiment with placement or consult the manufacturer's customer support.

Additionally, the product's maximum and minimum width range is not provided in the available evidence. If your doorway is unusually wide or narrow, measure carefully and check the product packaging or KidCo's website for the exact fit range before purchasing.