Quick Answer

Apply G-Rework decals to your MG kit by first coating the decal with warm water, sliding it into position, then gently pressing out water and air bubbles. Let it dry fully before sealing with a top coat.

Why G-Rework Decals Need Careful Application

G-Rework waterslide decals are thinner and more detailed than standard Bandai stickers. That means they conform beautifully to curved surfaces but also tear more easily if rushed. Taking your time with each step prevents frustration and wasted decals.

Step-by-Step Application Guide

  1. Prepare the Surface: Clean the MG kit surface with mild soapy water or isopropyl alcohol to remove oils and dust. A glossy finish helps decals adhere better; consider a gloss coat before starting. Skipping surface prep is the most common cause of silvering and poor adhesion.
  2. Cut and Soak the Decal: Cut out the desired decal close to the edge. Dip it in room-temperature water for 10-15 seconds until the decal loosens from the backing paper. Let it sit on the paper for another 20-30 seconds to fully release. Over-soaking makes the decal too fragile; under-soaking makes it stick to the paper.
  3. Slide and Position: Slide the decal onto the kit using a damp brush or tweezers. Position it while the decal is still wet; you can nudge it with a wet cotton swab. Once placed, gently blot excess water with a tissue. Never drag a dry tool across the decal — it will tear instantly.
  4. Remove Air and Water: Roll a damp cotton swab from the center outward to push out trapped water and air bubbles. For tight corners, use a pointed toothpick wrapped in tissue. Let it dry for at least 30 minutes. If you see silvering, you left water underneath. Re-wet the area and roll again.
  5. Seal with Top Coat: Once the decal is completely dry, apply a thin layer of clear top coat (gloss, semi-gloss, or matte) to protect the decal and blend it into the surface. This also prevents peeling during handling. A matte top coat hides the decal edge best; gloss preserves the decal's original sheen.

Product Facts

  • G-Rework Decal - MG MSM-07S Char's Z'Gok Use: High quality and tastefully designed waterslide decal from Korea specifically made for MG MSM-07S Char's Z'Gok. This set includes markings unique to Char's Z'Gok, so you get accurate placement guides and a custom look that standard decal sheets can't match.

    G-Rework Decal - MG MSM-07S Char's Z'Gok Use

    G-Rework Decal - MG MSM-07S Char's Z'Gok Use