Quick answer
Assemble the Mokee Midi Cot Bed with Drawer 140x70 by first building the cot frame, then installing the drawer mechanism, and finally attaching the drawer front. Follow the step-by-step process below for a safe, sturdy result.
What to expect from the Mokee Midi Cot Bed with Drawer 140x70
This bundle includes the Mokee Midi Cot Bed in Beech (140x70) made from solid FSC-certified beechwood. The raw, unfinished wood gives a clean Scandinavian look, but it also means the wood may have slight variations in grain and color. The cot features a height-adjustable base with 7 positions and a removable panel to convert it into a toddler bed. The included drawer adds storage underneath, so you'll need to install the drawer rails and front panel yourself.
Assembly requires two people for some steps, especially when lifting the cot sides into place. Plan for about 1–2 hours, and have a Phillips head screwdriver and a soft mallet on hand. The raw wood is prone to scratches, so work on a soft surface and avoid overtightening screws.
Step-by-step assembly instructions
- 1. Prepare your workspace and check parts: Lay out all parts on a clean, soft surface (like a rug or blanket) to avoid scratching the raw beechwood. Identify the cot side panels, end panels, base slats, drawer rails, drawer front, and hardware. Check that you have all screws, dowels, cam locks, and the Allen key. Missing any? Contact Mokee before starting. Do not force any part. If a dowel doesn't slide in easily, check that you're using the correct hole and that the wood isn't swollen from humidity.
- 2. Assemble the cot end panels: Attach the cam lock nuts into the pre-drilled holes on the inside of the end panels. Insert the wooden dowels into the corresponding holes on the side panels. Then align the side panels with the end panels and tighten the cam locks clockwise with a screwdriver. The raw wood may have slight friction; do not overtighten. Make sure the cam lock arrows point toward the edge of the panel once tightened. If they don't, the joint may be loose.
- 3. Install the base support rails and slats: The base height has 7 adjustable positions. Choose a height that suits your baby's age (higher for newborn, lower for toddler). Insert the base support rails into the chosen slots on the side panels. Then lay the slats across the rails, ensuring they sit evenly. Do not force slats into place; they should rest freely. Double-check that all slats are aligned and that the base is level. An uneven base can cause the mattress to tilt.
- 4. Attach the drawer rails to the cot frame: Locate the pre-drilled holes on the inside of the cot's bottom frame. Attach the drawer rails using the provided screws. Ensure the rails are parallel and at the same height on both sides. Use a level if needed. If the rails are not perfectly parallel, the drawer will stick or rub against the frame. Adjust before tightening fully.
- 5. Build the drawer box and attach the drawer front: Assemble the drawer sides and back using the cam locks and dowels. Then attach the drawer front panel using the screws provided. Slide the drawer box onto the installed rails. Check that it moves smoothly without binding. The drawer front may need slight adjustment. Loosen the screws, align the front panel so it sits flush with the cot frame, then retighten.
- 6. Convert the cot to a toddler bed (optional): If you want to use the cot as a toddler bed later, remove one of the side panels by unscrewing the cam locks. The removable panel is clearly marked in the instructions. Keep the hardware safe for future use. Only remove the panel when your child is ready to transition. The cot is safe as a crib until then.
Product facts
-
Midi Cot Bed with Drawer - Beech (140x70): The Mokee Midi Cot Bed with Drawer 140x70 is made from 100% FSC-certified solid beechwood with a raw, unfinished finish. The raw wood means no off-gassing from paints or varnishes, but it also requires careful handling to avoid stains and scratches during assembly.
Midi Cot Bed with Drawer - Beech (140x70)