Quick Answer
To assemble your Rement Pikmin Terrarium blind box, carefully open the packaging without tearing the instruction sheet, separate the parts by character, and snap the pieces together in the order shown on the sheet.
Why Assembly Order Matters
Each blind box contains a random character from the set of six. The instruction sheet is specific to that character, so using the wrong order can cause fragile parts to break or not fit. Always match the sheet to the figure before starting.
Common Mistakes to Avoid
Forcing pieces together is the most frequent issue. The plastic tabs are designed to click into place with light pressure. If a part resists, check that you have the correct orientation and that no debris is blocking the slot.
Another mistake is losing small accessories. Keep all parts in the tray until you are ready to attach them.
Step-by-Step Assembly Guide
- Open the Box Carefully: Peel the seal gently and slide out the inner tray. Do not cut into the tray, as the instruction sheet is folded underneath. Common mistake: tearing the sheet when pulling the tray out.
- Identify Your Character: Compare the figure parts to the six character names on the instruction sheet. Each sheet has a small icon matching the character. Common mistake: assuming all sheets are the same. If the sheet is missing, check the base of the figure for a stamped number that corresponds to the character list.
- Separate and Organize Parts: Remove each piece from the plastic frame using a small pair of nippers or scissors. File down any nubs with a fine nail file. Common mistake: twisting parts off, which can leave stress marks or break tabs.
- Assemble the Base First: Snap the base plate and any water or ground elements together. Ensure the tabs click fully. Common mistake: assembling the figure before the base, making it hard to attach later.
- Attach the Character and Accessories: Fit the Pikmin figure onto the base peg, then add small items like leaves or fruits. Press gently until you hear a click. Common mistake: over-tightening, which can crack the plastic. If a part does not click, remove it, check for flash, and trim with a hobby knife.
- Display and Adjust: Place the assembled terrarium on a stable shelf away from direct sunlight. The clear dome snaps on top. Common mistake: leaving fingerprints on the dome; handle it by the edges.
Product Details
-
Rement Pikmin Terrarium Collection 2 Blind Box: Character list includes six scenes: be pulled over, hump, fight, resistant to fire, take a break at the waterside, leave the electricity. Knowing the six possible characters helps you identify which one you received and confirm you have the correct instruction sheet.
Rement Pikmin Terrarium Collection 2 Blind Box
