Quick Answer
To assemble the Doona i Isofix Base correctly, first locate your vehicle's ISOFIX anchor points, then attach the base's connectors until you hear a click. Confirm the base is secure before clicking in your Doona car seat.
Why Proper Assembly Matters
The Doona i Isofix Base is designed to meet the European i-Size safety regulation (R-129), which means it must be installed precisely to provide maximum protection. A common mistake is rushing the installation or not checking the base's stability after clicking in the car seat. Always follow the steps below to avoid compromising safety.
Step-by-Step Installation Guide
- Locate ISOFIX Anchor Points: Check your vehicle's manual to find the ISOFIX anchor points, usually located in the gap between the seat back and the seat cushion. Ensure your vehicle is equipped with ISOFIX anchors before proceeding. Common mistake: Trying to install the base in a vehicle without ISOFIX anchors. The base is only compatible with vehicles that have these anchors.
- Attach the Base Connectors: Position the Doona i Isofix Base on the vehicle seat, aligning its connectors with the anchor points. Push the base firmly until you hear a distinct click, indicating the connectors are locked. Check that both sides are securely attached. Checkpoint: After clicking, gently pull the base to confirm it is locked. If it moves, re-engage the connectors.
- Secure the Support Leg (if applicable): If your vehicle seat requires the support leg, extend it until it touches the floor firmly. Adjust the leg so it is vertical and stable. Some vehicles may not need this step; refer to your vehicle manual. Common mistake: Not adjusting the support leg to the correct height, which can reduce stability.
- Click in the Doona Car Seat: With the base installed, place your Doona car seat onto the base. Press down until you hear a click, confirming it is locked. Check the base's indicator (if available) to ensure a secure connection. Checkpoint: After clicking, try to lift the car seat slightly to verify it is locked. If it lifts, re-engage the seat.
- Perform Final Safety Check: Shake the base and car seat assembly from side to side and front to back. There should be minimal movement (less than 1 inch). If the assembly moves excessively, re-install the base. Takeaway: A secure installation will have almost no play. If you feel any looseness, repeat the steps from the beginning.
Product Fact
-
Doona i Isofix Base: The Doona i ISOFIX base ensures correct installation every time. Our secure click-in/ click-out system provides effortless mobility for parents on-the-go. This means you can confidently install the base once and then quickly attach or detach the Doona car seat without re-adjusting, saving time and reducing installation errors.
Doona i Isofix Base
