Understanding Speedring Attachments
A speedring is the adapter that connects your strobe or flash to a softbox or other modifier. The attachment method depends on your light's mount type and the speedring design. Some speedrings use a locking ring, others use a bracket with a strap, and some are simple adapter rings that slide onto the flash head.
Before attaching, confirm your strobe's mount standard (Bowens, Profoto, Elinchrom, etc.) and that the speedring is designed for that mount. Using the wrong speedring can damage your gear or cause the modifier to fall.
Attaching a Speedring: General Steps
The exact process varies by speedring model, but these general steps apply to most setups. Always refer to your specific product instructions for details.
- 1. Identify the Mount Type: Check the back of your strobe or flash. Common mounts include Bowens (a bayonet-style ring), Profoto (a proprietary locking ring), and Elinchrom (a different bayonet pattern). Your speedring must match this mount.
- 2. Align the Speedring: Hold the speedring so its mounting side faces the strobe. Align any guide marks or notches with the corresponding features on the flash head. For Bowens mounts, the three tabs should line up with the slots.
- 3. Secure the Connection: Twist or lock the speedring into place. For Bowens-style adapters, insert and twist clockwise until it clicks. For Profoto speedrings, slide the ring over the flash head and tighten the locking ring. For Elinchrom adapters, align the bayonet pins and twist.
- 4. Check Stability: Gently tug the speedring to ensure it is firmly attached. A loose connection can cause the modifier to shift or fall during use.
Attaching the Quick-Mount S-Bracket 2 (Bowens)
The Quick-Mount S-Bracket 2 is designed for Bowens modifiers and works with speedlights, compact flashes, and LED lights. It uses a reinforced nylon body with an integrated locking strap for stability. No assembly or mounting plates are needed—just lock in your light and start shooting.
To attach, place your light (with a diameter between 2.7" and 3.4") into the bracket. Adjust the locking strap with the rubberized grip to hold it firmly. The bracket supports up to 20 lbs (9.1 kg) and includes a 9mm umbrella receptacle. It also has three cold shoe mounts around the perimeter plus a center mounting point if you want to attach up to four speedlights for more power.
Quick-Mount S-Bracket 2 Key Specs
-
Quick-Mount S-Bracket 2 (Bowens): Fits round and rectangular speedlights, compact flashes, and LED lights with a 2.7” to 3.4” (6.9 to 8.6 cm) diameter, up to 300Ws/60W. Ensures your light source fits securely before you attach the bracket to a Bowens modifier.
Quick-Mount S-Bracket 2 (Bowens)
-
Quick-Mount S-Bracket 2 (Bowens): Supports up to 20 lbs (9.1 kg) with a uni-body design and integrated locking strap. Provides stable support for heavier modifiers like large softboxes or beauty dishes.
Attaching the Optical Spot Light Mount for Elinchrom EL
The Optical Spot Light Mount for Elinchrom EL is a dedicated adapter that pairs Elinchrom (EL) mount lights with the Optical Spot modifier by Lindsey Adler. It features durable all-metal construction for dependability.
To attach, simply align the mount's bayonet pins with the corresponding slots on your Elinchrom flash head and twist until it locks. The mount is designed specifically for Elinchrom EL mounts, so it should fit securely without wobbling. Once attached, you can quickly and securely connect the Optical Spot modifier.
Optical Spot Light Mount for Elinchrom EL – At a Glance
-
Optical Spot LIght Mount for Elinchrom EL: Pairs Elinchrom (EL) mount lights with the Optical Spot by Lindsey Adler. Confirms compatibility: use only with Elinchrom EL mount strobes.
Optical Spot LIght Mount for Elinchrom EL
-
Optical Spot LIght Mount for Elinchrom EL: Durable all-metal construction for dependability. Metal construction provides long-term reliability compared to plastic adapters.
Attaching the Speedring for Profoto (Standard)
The Westcott Speedring for Profoto (Standard) is an adapter ring designed to mount Westcott softboxes and modifiers onto Profoto studio flashes. It provides a secure connection for consistent lighting setups.
To attach, slide the speedring over the Profoto flash head. The standard size is designed for Profoto flash heads, so it should fit snugly. Tighten the locking ring (if present) to secure it. Then attach your Westcott modifier to the speedring's front side. This adapter is specifically for standard Westcott modifiers, so confirm your modifier's size before use.
Compatibility and Safety Notes
Always verify that your speedring is designed for your specific strobe mount. Using an incompatible adapter can damage the flash head or modifier, or cause the modifier to fall during use.
For the Quick-Mount S-Bracket 2, the supplied information confirms it fits lights with a diameter of 2.7" to 3.4" and supports up to 20 lbs. The Optical Spot Mount is confirmed for Elinchrom EL mounts only. The Speedring for Profoto is confirmed for Profoto flash heads and standard Westcott modifiers.
If your strobe uses a different mount (e.g., Broncolor, Comet), look for a dedicated speedring for that system. The supplied information does not cover all possible mount types.


