Quick answer
To attach a star pet ID tag to a collar, use the included stainless steel split ring. Open the ring slightly with your fingernails, slide it through the tag hole, then thread the collar through the ring and close it securely.
Why the split ring matters
The stainless steel split ring that comes with your star pet ID tag is designed to hold the tag securely even during active play or swimming. Unlike basic key rings, split rings have a double-wrapped coil that resists accidental opening when the tag snags on brush or furniture.
Choosing the right collar loop
Most collars have a D-ring or a fabric loop where you can attach tags. For the best balance of visibility and safety, attach the star tag to the D-ring rather than a loose fabric loop. This prevents the tag from spinning behind the collar or getting caught.
Step-by-step attachment guide
- Open the split ring: Hold the split ring with both thumbs and index fingers. Gently push the outer coil away from the inner coil so a small gap appears. Do not twist or bend the ring sideways—it should remain flat. Common mistake: pulling the ring apart like a key ring can damage the coil. Use a gentle sliding motion instead.
- Slide the ring through the tag hole: With the gap open, thread the split ring through the hole on the star tag. Make sure the ring passes completely through so the tag sits on the ring, not just pinched between coils. Checkpoint: after inserting, the tag should move freely along the ring without resistance.
- Thread the collar through the ring: Open the split ring again slightly. Slide the ring over the collar's D-ring or loop. Ensure the tag faces outward so the engraved information is visible. Common mistake: attaching the ring to a loose fabric loop instead of the D-ring can cause the tag to flip and hide the engraving.
- Close the split ring securely: Push the outer coil back into place so the gap disappears. Run your fingernail around the ring to confirm there are no sharp edges or misaligned coils. Give the tag a gentle tug to test the connection. Checkpoint: if the ring still has a visible gap, repeat the closing step. A properly closed ring will not snag on your pet's fur or clothing.
Product facts
-
Stainless Steel Star Pets ID Tag: This stainless steel star pet ID tag includes a free strong stainless steel split ring to hold your pet ID tag securely. You don't need to buy a separate ring or fastener; the included split ring is made from the same durable material as the tag, so it won't rust or weaken over time.
Stainless Steel Star Pets ID Tag