Quick answer
Attaching the HRT tip on a T Series baton requires removing the stock tip and pressing the new tip onto the shaft, following the same steps shown in the BreakAway Tip Installation video.
Why choose the HRT tip
The Human Rights Tip (HRT) is overmolded with Santoprene polymer and features grooves that enhance fingertip grip during manual extension. It was designed to meet European law enforcement standards, making it a reliable upgrade for your T Series baton.
Before you start
Make sure your baton is unloaded and safe to handle. The HRT tip fits T Series models and replaces the stock tip. No special tools are required, but a firm surface helps with pressing the tip on.
Step-by-step installation
- Remove the stock tip: Grip the existing tip firmly and twist it counterclockwise to unscrew it from the baton shaft. If it is tight, use a rubber jar opener for extra grip. Do not use pliers or metal tools that could scratch the shaft or damage the threads.
- Align the HRT tip: Position the new HRT tip over the threaded end of the baton shaft. Make sure the grooves face outward for easy fingertip access. Check that the tip is straight before pressing—crooked alignment can cause binding.
- Press the tip onto the shaft: Place the baton upright on a firm surface and press the HRT tip down firmly until it seats fully. You should hear or feel a click when it locks into place. Avoid hammering the tip—pressing with steady hand pressure is sufficient and prevents damage.
- Test the fit: Extend and retract the baton a few times to confirm the tip stays secure and does not wobble. If it feels loose, remove and re-press the tip. A loose tip can detach during use; reinstall if needed.
Product details
-
HRT Tip (T Series): The HRT tip is overmolded with Santoprene polymer and features grooves to enhance fingertip grip for manual extension. The Santoprene material provides a non-slip surface, and the grooves help you extend the baton more reliably under stress.
HRT Tip (T Series)